Table of Contents
Advertisement
en Home Connect
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 34
¡ → "Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 35
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
16.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
Requirements
¡ Your router has a WPS function.
¡ Wi-Fi is activated on the router.
¡ The Wi-Fi basic setting is activated
on the appliance.
→ "Activating Wi-Fi on the appli-
ance", Page 36
¡ The appliance receives signals
from the WLAN home network (Wi-
Fi) at its installation location.
¡ The Home Connect app is installed
on your mobile device.
34
Press and hold
1.
3 seconds.
a The display shows "Aut".
Press
.
2.
Press the WPS button on the
3.
router within the next 2 minutes.
Take note of the information in the
documents for your router.
flashes on the display.
a
a The device connects to the Wi-Fi
home network.
a If the display shows and
up permanently, the appliance is
connected to the Wi-Fi home net-
work.
If the appliance is not connected
4.
to the Wi-Fi home network, the dis-
play shows "Err".
Check whether the appliance is
‒
within the range of the Wi-Fi
home network.
Reconnect the appliance to the
‒
Wi-Fi home network with WPS
function.
Connect the appliance to the
5.
Home Connect app. → Page 35
for at least
lights
Advertisement
Table of Contents
