Table of Contents
Advertisement
en operation
Press and hold 记忆 for approx. 3
▶
seconds.
Press 记忆 to call up the saved
programme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
14.5 Loading laundry
Note: To prevent creasing, take note
of the maximum load for the
→ "Programmes", Page 26.
Requirement: The laundry is pre-
pared.
→ "Laundry", Page 30
Open the door.
1.
Make sure that the drum is empty.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
14.6 Adding detergent and
care product
Note: Observe the information about
detergents and care products
→ Page 31.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
14.7 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press
.
1.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End.
32
If
is selected, the laundry is not
2.
spun and the water is drained after
rinsing.
Notes
¡ If the laundry is not removed, the
Anti-Crease programme starts after
15 minutes. The programme takes
around 30 minutes. The display
shows 00:00 and
Press anywhere on the display to
cancel the Anti-Crease programme
and to remove the laundry.
¡ If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
14.8 Adding laundry
Press
.
1.
During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
appears, it is not pos-
Note: If
sible to add laundry.
When
goes out, it is possible to
add laundry.
Open the appliance door.
2.
Add or remove laundry.
3.
Close the appliance door.
4.
Press
.
5.
14.9 Cancelling the pro-
gramme
Press
.
1.
Open the appliance door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the programme.
appears.
Advertisement
Table of Contents
