Using The Wired Remote Control; Using The Unit With Optional Accessories; Maintenance; Using The Unit With An Audio System - Panasonic SL-CT470 Operating Instructions Manual

Using the Wired Remote Control

The remote control can be operated regardless of the hold mode
of the unit.
Preparation:
Release the remote control from the hold mode.
VOLUME
HOLD
HOLD
∫ Operation confirmation tones
When an operation button is pressed, a confirmation tone
sounds. Refer to the parentheses in the illustration for the differ-
ent types of confirmation tones.

Using the Unit with Optional Accessories

Using the unit with an audio system

Use stereo connection cable (not included) to listen to CDs
through your home audio system.
≥Turn off the amplifier power and connect the cable.
≥Do not connect the cable to the PHONO jacks on the amplifier.
≥Obtain the optional connecting cable if the amplifier comes with
mini-phone jacks.
≥Adjust the volume on the amplifier.
Note!
≥Sound quality changes when S-XBS, TRAIN or LIVE is select-
ed, but volume is reduced by about half.
≥You can connect speakers, active or otherwise, with an imped-
ance of 1 k≠ or less to the headphone jacks. Set the unit's vol-
ume between 4 and 6.
OUT jack
Side panel of the unit
RESUME RANDOM NORMAL HOLD
OUT
5 4
(White)
(Red)
Stereo phono cable (not included)
5
How to use the wired remote control
2
To start play
To stop play
To turn off the
unit
Using the unit with a car audio
system
Items to be purchased
For connection to the car audio system:
Car stereo cassette adaptor (SH-CDM10A)
Connect the car stereo cassette adaptor to the unit's
headphone jack. (When doing this, keep the unit's
VOLUME at a setting between 4 and 6.)
For securing the unit and connecting the power
supply:
≥Car adaptor (SH-CDC9)
≥Car mounting kit (SH-CDF7)
≥Car mounting arms, Car insulator
Note.
It may not be possible to use the unit with some types of car
stereo owing to restrictions imposed by the construction of the
car stereo cassette adaptor.
For further details, refer to the instructions of the part concerned.
Amplifier
L
To CD or AUX
terminals
R
Press once during off or stop mode.
PUSH
(Beep)
Press once during play.
PUSH
(Beep...Beep)
Press and hold during play or stop
mode.
PUSH
(Beep...Bee...p)
Turn during play.
Skipping
tracks
Searching
Backward
through tracks
(Beep Beep Beep)
Turn and hold during play.
When adjusting the volume using the
remote control, position the volume
control on the unit between 4 and 6.
To adjust the
volume
s
VOLUME

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a
soap-and-water solution or a weak detergent solution.
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Maintaining the lens
Open the lid and clean the lens as shown in the figure.
Use a cotton swab to gently wipe off any finger-prints.
Recommended product: Lens cleaner kit (SZZP1038C)
Air blower for
camera lens
Lens
Lens
Forward
(Beep Beep)
r
2
HOLD