Image And Video Playback Modes - SIGNIFY EA2204 Instruction Manual

INSTRUCTIONS (CONT.)

Image and Video Playback Modes

There are three options for playing back saved files on the Wildlife Camera. These are
on-board viewing, via connected PC, or directly accessing the micro SD card. Each
option for playback is explained below.
On-Board Viewing
To review the saved files directly on the viewing screen of the Wildlife Camera follow
the steps below.
1. Slide the power/mode switch to SETUP mode.
2. Press the REPLAY button to select playback mode. The
top left of the viewing screen.
3. Use the and
the image and/or video were taken, and the number of saved files is displayed in
the top right corner of the viewing screen when in playback mode.
4. The icon will display in the bottom left corner of the viewing screen indicating
the saved file is a video file. If there is no icon displayed on the bottom left corner of
the viewing screen, then the saved file is a still image file.
5. To play a video file displayed on the viewing screen, press the OK button. To pause
or stop the video playing, press the OK button. To resume playing the video, press
the OK button again.
6. To exit the current image or video playback, press the REPLAY button once and you
will be able to access the other saved files.
7. Once you are finished using playback mode, press the REPLAY button to exit and
return to the 'Camera', 'Video' or 'Camera + Video' modes.
AFTER SALES SUPPORT
32
1300 777 137
SHOT SHOT
SHOT SHOT
MODE MODE
MODE MODE
buttons to scroll through the saved files. The date and time that
MODEL: EA2204 PRODUCT CODE: 708149 04/2022
icon will display on the
service@unclebills.com.au