Do you have a question about the EA1427 and is the answer not in the manual?
Questions and answers
Stephen,,,, Little
February 28, 2025
dont know the password ,so how do i do a factory reset
2 comments:
Mr. Anderson
February 28, 2025
To perform a factory reset on the SIGNIFY EA1427, follow these steps: 1. Access the menu settings. 2. Navigate to the Reset Default Setting option. 3. Select YES to reset all parameters to factory settings.
If a password is set and you do not know it, performing a reset should remove the password protection.
This answer is automatically generated
Stephen,,,, Little
March 1, 2025
i cant access the menu settings
Stephen,,,, Little
March 1, 2025
is there a reset button sumwhere on the device i cant see
1 comments:
Mr. Anderson
May 14, 2025
Yes, the SIGNIFY EA1427 device has a reset function. You can reset all parameters to the factory default settings by selecting "Reset" and choosing "YES" in the menu.
This answer is automatically generated
Stephen,,,, Little
March 1, 2025
as soon as i switch it to setup or start i go straight to pasaword which i dont know ,how do i get away from the password to reset it
1 comments:
Mr. Anderson
March 1, 2025
To reset the password on the SIGNIFY EA1427 wildlife camera, access the menu settings and navigate to the "Password protection" option. You can turn it ON or OFF as needed. If you have forgotten the password, refer to the instruction manual or contact after-sales support at 1300 777 137 or service@unclebills.com.au for assistance.
Welcome Congratulations on choosing to buy a Signify product. All products brought to you by Signify are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction are backed by our comprehensive 1 Year Warranty and customer technical support line.
General Information and Safety Instructions Product Overview Before First Use Instructions Repair and Refurbished Goods or Parts Notice Other Useful Information Cleaning and Maintenance Storage Responsible Disposal Specification Table AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
12. Do not place the Wildlife Camera near a hot burner (gas or electric), or other heat emitting sources or open flames. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Bottom of Wildlife Camera PIR Sensor LED Indicator Microphone Power/Mode Switch LED IR Flash USB Port Lens SD Card Slot Lock Hole 10. 6V DC Input Port AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Page 7
Right Button Up Button/Video Mode OK Button Menu Button Shot Play (Playback Button) Left Button 10. Battery Slot Included (not pictured): Mounting Strap, USB Cable, SD Card AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Page 8
Video Mode Camera mode Picture size Video Resolution SD card indicator SD card indicator Remaining memory Video time Battery Indicator Status Time Date Battery Indicator Status AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
NOTE: A 6V DC power supply is optional and not included in this pack. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Page 10
NOTE: When the 6V DC Power supply is not being used, please ensure the DC input cover is always closed. NOTE: Dispose of used batteries correctly. Please see the "Responsible Disposal" section on page 16 for further information. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
There are 4 options available: 10S, 20S, 30S and 60S. Audio If choose ON, camera will record sound in video ON / OFF recording mode, otherwise it won't record sound. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Page 12
Temp Unit Celsius / Fahrenheit Select either Celsius or Fahrenheit. Password ON/OFF Setup a password to protect your camera. protection AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Page 13
Camera. Next, ensure the camera is shut down, connect the camera to the computer with the USB cable, and then you can view the file directly on the PC. It may take a few minutes to load all files. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
When the Wildlife Camera is not in use, disconnect it from any power source and store in a cool, dry and well ventilated location out of direct sunlight. Ensure that it is not subject to humidity. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
14 x 10.8 x 7.6cm NET WEIGHT: 305g (WITHOUT BATTERY) WATERPROOF GRADE: IP66 VERSION NO: ISSUE DATE: 26TH NOVEMBER, 2018 THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. AFTER SALES SUPPORT service@unclebills.com.au 1300 777 137 MODEL: EA1427 PRODUCT CODE: 6568 04/2019...
Need help?
Do you have a question about the EA1427 and is the answer not in the manual?
Questions and answers
dont know the password ,so how do i do a factory reset
To perform a factory reset on the SIGNIFY EA1427, follow these steps:
1. Access the menu settings.
2. Navigate to the Reset Default Setting option.
3. Select YES to reset all parameters to factory settings.
If a password is set and you do not know it, performing a reset should remove the password protection.
This answer is automatically generated
i cant access the menu settings
is there a reset button sumwhere on the device i cant see
Yes, the SIGNIFY EA1427 device has a reset function. You can reset all parameters to the factory default settings by selecting "Reset" and choosing "YES" in the menu.
This answer is automatically generated
as soon as i switch it to setup or start i go straight to pasaword which i dont know ,how do i get away from the password to reset it
To reset the password on the SIGNIFY EA1427 wildlife camera, access the menu settings and navigate to the "Password protection" option. You can turn it ON or OFF as needed. If you have forgotten the password, refer to the instruction manual or contact after-sales support at 1300 777 137 or service@unclebills.com.au for assistance.
This answer is automatically generated