Getting Started; Before First Use - SIGNIFY EA2204 Instruction Manual

GETTING STARTED

Before First Use

Prior to using your Wildlife Camera, please read all safety and operating instructions
thoroughly. Please ensure you follow the steps below before using this device.
1. Unpack the product but keep all packaging materials until you have made sure
your new Wildlife Camera is undamaged and in good working order.
2. Plastic wrapping can be a suffocation hazard for babies and children, so ensure all
packaging materials are kept out of their reach.
3. Remove the protective film from the Wildlife Camera Infrared LED Array, camera
lens, central sensor zone and the side PIR sensors by pulling the protruding tab,
and dispose of thoughtfully.
4. We recommend you keep the original packaging for storing your Wildlife Camera
when not in use.
NOTE: It is EXTREMELY important for you to remove ALL protective film from the
array, lenses and sensors. The Wildlife Camera will not function properly if this film is
not removed and the still images and videos will come out blurry.
Opening and Closing the Wildlife Camera
The memory card slot, mini USB port, operating buttons and battery compartment are
located inside the protective case of the Camera.
1. To open the protective case, lift the tabs on the locking brackets to release the buckles.
Lift the buckles off the lip of the locking brackets and open the Wildlife Camera.
2. To close the protective case, place the buckles over the lip of the locking brackets
and press the tabs down to lock the buckles into place.
NOTE: There is a hole located between the two brackets where you can attach a lock
to secure the Wildlife Camera closed and prevent any tampering.
Memory Card Installation
The Wildlife Camera uses a micro SD card for data storage. A memory card must be
inserted in order to take and save still images or video recordings, or to access any of
the menu modes and functions.
Insert the micro SD card (included) into the Wildlife Camera before switching ON or
setting up the camera settings.
AFTER SALES SUPPORT
12
1300 777 137
MODEL: EA2204 PRODUCT CODE: 708149 04/2022
service@unclebills.com.au