Sony PCSA-CHG90 Operating Instructions Manual page 62

Before installation
After deciding the shooting direction, make the required holes for the ceiling
bracket (B) and connecting cables on the ceiling or shelf, etc. For the
dimensions of the ceiling bracket (B), see page 40.
Notes
• The connecting cables cannot be passed through the ceiling bracket (A). A
hole for the wiring is required in the ceiling or shelf, etc. behind where the
Camera Unit is to be installed.
• Do not attach any object other than the Camera Unit to the ceiling brackets.
The ceiling bracket cannot be attached to the junction box when
•
installing the
Installation on a ceiling (example)
1
Remove the cable cover on the rear of the Camera Unit.
For details on how to remove it, see "To remove the cable cover" on page 14.
2
Set "Image Flip" in the Video Setup menu to "On" with the PCS-HG90
Video Communication System.
For details, refer to the Operating Instructions of the PCS-HG90.
3
Remove the four screws on the bottom of the Camera Unit to remove the
four feet.
18
GB
Installation
on a ceiling.
Camera Unit