Sony PCSA-CHG90 Operating Instructions Manual page 68

11
Attach the cable cover.
For attachment, see page 15.
The SONY and/or HD nameplates can be turned upside down, if necessary,
To remove the Camera Unit
1
Remove the three screws used to attach the Camera Unit in step 9 of
"Installation on a ceiling (example)" on page 23.
2
Turn the Camera Unit with the bracket counterclockwise to remove.
Installation on a shelf, etc. in a high position (example)
1
Remove the cable cover on the rear of the Camera Unit.
For details on how to remove it, see "To remove the cable cover" on page 14.
2
Remove the four screws on the bottom of the Camera Unit to remove the
four feet.
24
GB
Installation