Installing The Camera Unit - Sony PCSA-CHG90 Operating Instructions Manual

Installing the Camera Unit

To install the Camera Unit on a desk
Place the Camera Unit on a flat surface.
If you have to place the Camera Unit on an inclined surface, make sure that the
inclination is less than ±15 degrees, so that the pan/tilt performance is
guaranteed.
Notes
• You should take an appropriate countermeasure to prevent the Camera Unit
from falling.
• Do not grasp the camera head when carrying the Camera Unit.
• Do not turn the camera head by hand. Doing so may result in the Camera
Unit malfunctioning.
16
GB
Installation