Control Authority; Motor Control Mode - ABB M10 Series Manual

Control authority

M10x control authority is the term describing the privileges for allowing motor
control operation through M10x. It is also a setting parameter in M10x to define
which control access group has privilege to operate the motor via M10x.
For detailed descriptions on control access in M10x, please refer to 1TNC 911112
D0205 M10x User Guide.
PROFIBUS Option (Only in M10x-P)
Function
Range
Default Setting
Related Parameters
Description
When PROFIBUS auto mode active is enabled, M10x accepts the command from
fieldbus to select the control access.
Soft Local/Remote
Function
Range
Default Setting
Related Parameters
Description
When Local hardwiring is enabled, M10x accepts its commands from the hardwired
inputs.
When Remote Fieldbus is enabled, M10x accepts its commands from the hardwired
inputs.
MD Control
Function
Range
Default Setting
Related Parameters
When MD (Operator panel) is enabled, M10x accepts the command from operator
panel MD Control authority M10x Parameter Description.
: Control Authority
: PROFIBUS Auto Mode Active Enabled/
PROFIBUS Auto Mode Active Disabled
: PROFIBUS Auto Mode Active Disabled
: Digital Inputs/Loc/R/Control Authority/Soft Local/
Remote Control Authority/MD Control
:
: Control Authority
: Local Hardwiring / Remote Fieldbus
: --
: Digital inputs/Loc/R /Control authority/PROFIBUS option
:
: Control authority
: MD (Operation panel)/MD enable in Local/
MD enabled in Remote/
MD enabled when Auto Mode set "0"/MD enabled when
Auto Mode set "1"
: --
: Digital inputs/Loc/R/MD control
Control authority/PROFIBUS option
M10x Parameter description | Motor control and protection unit 29