Displaying the Image You Just Recorded
(Image Review)
When you purchase your camera, it is initially configured with
the Image Review feature turned on. Image Review displays the
image you just recorded so you can check it.
1.
In the REC mode, press [MENU].
2.
On the "REC" tab, select "Review" and then
press [ ].
3.
Use [ ] and [ ] to select the setting you want
and then press [SET].
To configure the camera to do this
after an image is recorded:
Display the image for about one second
Nothing
Using Icon Help
Icon help displays guidance text about an icon when you select it
on the monitor screen while in the REC mode (page 267).
• Icon help text is displayed for the following functions:
Recording mode, focus mode, metering, flash mode, white
balance, self-timer, EV shift. Note, however, that metering,
white balance, self-timer and EV shift icon help text appears
only when "Metering", "White Balance", "Self-timer" or "EV
shift" respectively is assigned to the [ ] and [ ] keys with the
key customization feature (page 135).
1.
In the REC mode, press [MENU].
2.
On the "REC" tab, select "Icon Help" and then
Select this
press [ ].
setting:
3.
Use [ ] and [ ] to select the setting you want
On
and then press [SET].
Off
To do this:
Display icon help text next to the icon of
a function when you select the function
Turn off icon help
137
Select this
setting:
On
Off
ADVANCED SETTINGS