Table of Contents
Advertisement
Operating the built-in answering device
Activating the answering device
light
on/flash
1
Turn the
(Auto answer) light on by pressing
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
To record your own greeting message, see page 12.
Listening to recorded messages
When new messages are recorded, the
answer) light will flash.
Press
to listen to recorded messages.
Listening to all of the recorded
messages
Press
(Replay).
Erasing a specific message
1
消去
Press
(Erase) while listening to the message
you want to erase.
2
Press
(Start).
Erasing all of the recorded messages
1
消去
Press
(Erase).
2
Press
(Start).
Erasing your own greeting message
1
消去
Press
(Erase) twice.
2
Press
(Start).
The pre-recorded Japanese greeting message will
be played when you receive a call.
Operating the answering device
from a remote location
Preparation: Programming the remote operation ID
.
1. Press
2. Press
3. Enter any 4-digit number (remote operation ID) except
4. Press
5. Press
(Auto
Operation: Listening to a recorded message from a
remote location
Turn the
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press
light on
機能
(Function).
.
0 0 6
or #.
登録
(Register).
(Stop).
(Auto answer) light on before you go out.
2
or wait 4 seconds.
Only the new recorded messages will be played
back.
To listen to all the recorded messages, press
after the new messages have been played back.
4
13
Advertisement
Table of Contents
