Protect/Releasing Protection; Print (Dpof) - Panasonic PROLINE LQ-DRM200 Operating Instructions Manual

Protect/Releasing protection

[SD/CARD] [RAM]
You can set/release protection for whole folders or for individual still
pictures.
After performing steps 1 to 2 of "Displaying still pictures
(Album Display)" (page 41), perform the following steps:
3
Select the folder for displaying to set/release the
protection.
(page 40, "Selecting the drive and the folder")
Use [3, 4] (10) to select "Protect" and press
4
[ENTER] (10).
Use [3, 4, 2, 1] (10) to select "Folder" or still
5
picture you wish to protect/unprotect and press
[ENTER] (10).
≥Repeat this if you set/release protection of more than one still
picture.
JPEG
Input PC CARD 100CDPFP
Protect
Folder
Cancel Protect
0001 0002 0003
Select Page
0004 - - - - - - - -
0 – 9
SELECT
- - - - - - - - - - - -
ENTER
Back 1 / 1 Next
RETURN
ª To select all the still pictures in the folder
Use [3, 4, 2, 1] (10) to select "Folder" and press [ENTER]
(10).
(A check mark appears on the folder's name; check marks
inputted separately will be erased.)
To cancel check marks:
Use [3, 4, 2, 1] (10) to select the folder or still picture with
the check mark and press [ENTER] (10).
Use [3, 4, 2, 1] (10) to select "Protect"/"Cancel"
6
and press [ENTER] (10).
≥The confirmation screen appears.
Use [2, 1] (10) to select "Yes" and press [ENTER]
7
(10).
≥The padlock mark appears/disappears on the selected folder
or still picture.
ªTo stop partway through
Select "No" in step 7 and press [ENTER] (10).
Or
Press [RETURN] (28).

Print (DPOF)

[SD/CARD]
You can select a whole folder or individual pictures for printing and
specify the number of prints to be made (maximum 999 files).
After performing steps 1 to 2 of "Displaying still pictures
(Album Display)" (page 41), perform the following steps:
3
Select the folder for displaying to set the DPOF.
(page 40, "Selecting the drive and the folder")
Use [3, 4] (10) to select "Print (DPOF)" and press
4
[ENTER] (10).
Use [3, 4, 2, 1] (10) to select the "Whole" or still
5
pictures you wish to print and press [ENTER] (10).
≥Repeat this if you print more than one still picture.
JPEG Input
PC CARD 100CDPFP
DPOF
Whole
0001 0002
Select Page
0004 - - - -
0 – 9
SELECT
- - - - - - - -
ENTER
Back 1 / 1
RETURN
ª To select all the still pictures in the folder
Use [3, 4, 2, 1] (10) to select "Whole" and press [ENTER]
(10).
(A check mark appears on the folder's name; check marks
inputted separately will be erased.)
To cancel check marks:
Use [3, 4, 2, 1] (10) to select the folder or still picture with
the check mark and press [ENTER] (10).
Use [3, 4, 2, 1] (10) to select "DPOF" and press
6
[ENTER] (10).
≥The confirmation screen appears.
7
Confirm that "Number of prints" is selected and use
[2, 1] (10) to set number of pages (0 to 9).
Use [3, 4, 2, 1] (10) to select "Set" and press
8
[ENTER] (10).
≥The DPOF mark appears if you set one or more
pictures to print.
ªTo stop partway through
Select "Cancel" in step 8 and press [ENTER] (10).
Or
Press [RETURN] (28).
ªTo change print (DPOF) settings
1) In step 5, use [3, 4, 2, 1] (10) to select "Whole" or a still
picture with DPOF mark and press [ENTER] (10).
2) Use [3, 4, 2, 1] (10) to select "DPOF" and press [ENTER]
(10).
3) Use [2, 1] (10) to change the print setting.
≥The print setting will be cancelled if you set number of pages
to "0".
4) Use [3, 4, 2, 1] (10) to select "Set" and press [ENTER]
(10).
For your reference
≥Settings cannot be made for folders and files not in accordance
with DCF standards.
≥Print settings (DPOF) made using this unit may not be viewable
on other equipment.
≥Settings cannot be made if there is no remaining space on the
card.
≥All settings made on other equipment, except the number of
prints, will be canceled.
44
Editing still pictures (continued)
DPOF
0003
- - - -
- - - -
Next