Page 1
5- 6 Hex flange nut gradea M5 SRC Design uses Metric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the T orque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Page 2
Mounting Instructions Step 1: Remove the original screws, pin, and remove the original guard before starting to mount SRC Radiator Guard (as show) Step 2: Orient the Radiator Guard (1) and Slip-in the washer M6 (3)-2 off, Screw M6x25 (2)-2 off, (Shown in “Red”...
Page 3
Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC To the maximum extent possible, our design use the current Mounting/Fitment of the...