Advertisement
Step 2:
Orient the Radiator Guard (1)
and Slip-in the washer M6 (3)-2
off, Screw M6x25 (2)-2 off,
(Shown in "Red" colour), which
holds the Radiator to the Chassis
frame through and secure the
threads, and tighten it fully.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 4:
Align the Dirt Shield, as shown, in-line
with the Mounting holes and slip-in
the original Screw and original pin in
motorbike (as show) and secure the
threads and tighten it fully.
Step 1:
Remove the original screws, pin,
and remove the original guard
before starting to mount SRC
Radiator Guard (as show)
Page 2
Advertisement
