Table of Contents
Advertisement
6.2 Explanation of system
settings – screen 1
6.3 Explanation of system
settings – screen 2
Schaeffler Technologies
Default mode:
Heating mode to which the heater is set and in which it starts
for the first time, or to which it returns if "Default" is pressed.
Default temp:
Setpoint temperature at which the heater starts, or to which it
returns if "Default" is pressed.
Default time:
Setpoint time with which the heater starts, or to which it
returns if "Default" is pressed.
Default max. speed:
Maximum setpoint, maximum heating speed in the
temp&speed modes. This does not mean that the heater will
always reach this speed. This depends, among other things,
on the geometry of the workpiece, the ledge used, etc.
Default Temperature hold:
Default temperature hold on or off
19
Advertisement
Table of Contents
