Specifying The Initial Data Mode Screen; Configuring Sleep State Settings - Casio EX-S12 EX-S12 User Manual

Specifying the Initial Data Mode Screen (DATA View)
Procedure
[MENU] * Set Up Tab * DATA View
See page 147 for details.
Configuring Sleep State Settings (Sleep)
Procedure
[MENU] * Set Up Tab * Sleep
This feature turns off the monitor screen whenever no camera operation is performed
for a preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (Sleep is disabled while "Off" is
selected.)
• Sleep is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During Auto Shutter standby
– During Voice Recording playback or recording
– During movie recording and playback
• When both sleep and Auto Power Off are turned on, Auto Power Off takes priority.
158
Other Settings (Set Up)