Important Error Messages - Panasonic EB-X70 Operating Instructions Manual

Problem
X70 does not Discover
another Bluetooth
®
device.
X70 fails to Pair with
another Bluetooth device
®
X70 is not Discovered by
other Bluetooth devices
®
Call is terminated when
closing the phone

Important error messages

These are some of the important error messages which may be displayed.
Area Not Allowed.
Network Not Allowed.
Security Failure.
SIM Blocked/Contact
service provider.
SIM Error.
SIM Invalid.
Function Unavailable.
PIN2 Invalidated.
Message Rejected Store
Full.
Cause
The other Bluetooth
®
device may not be in
Discoverable mode.
Incorrect Passkey entered.
X70 may already be
Paired with 10 devices.
X70 is not in Discoverable
mode.
Active Flip is enabled.
Roaming in the selected area is not allowed.
Roaming with the selected network is not allowed.
The network has detected an authentication failure
because your SIM is not registered with that network –
contact your service provider.
The SIM is blocked because one of the PIN/PIN2
unblocking keys (PUK/PUK2) has been entered
incorrectly ten times – contact your service provider.
The phone has detected a problem with the SIM –
switch the phone off and then back on; if the message is
still displayed contact your service provider.
The SIM has failed one or more of the SIM
personalisation checks – contact your service provider.
The selected feature is either not supported by the SIM
or is not available with the current subscription –
contact your service provider.
The PIN2 is blocked permanently because the wrong
PUK2 has been entered ten times, services controlled
by PIN2 cannot be used – contact your service provider.
A message has been received but the message store is
full – to receive messages, delete some of the currently
stored messages or set messages to Auto Delete.
Troubleshooting
Remedy
Put the other device into
Discoverable mode.
Check Passkey and retry.
Delete a device from the
Paired Devices list.
Put the X70 into
Discoverable mode.
Disable Active Flip.
135