Panasonic X70 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Cell Phone
  5. X70
  6. Operating instructions manual

Panasonic X70 Operating Instructions Manual

Digital cellular phone
Hide thumbs Also See for X70:
Table of Contents

Advertisement

Quick Links

X X 70
Operating Instructions
Digital Cellular Phone
Before operating this equipment please read these instructions completely

Advertisement

Table of Contents
loading

Related Manuals for Panasonic X70

Summary of Contents for Panasonic X70

  • Page 1 X X 70 Operating Instructions Digital Cellular Phone Before operating this equipment please read these instructions completely...

  • Page 2: Table Of Contents

    Contents Contents ....... . 3 Important information ..... 5 Care and maintenance .
  • Page 3 Contents Glossary ....... . 137 Specifications......139 EU warranty and licensing.

  • Page 4: Important Information

    Panasonic accepts no liability for any and all losses howsoever arising from any loss of data, including but not limited to direct and indirect losses (to include, but not limited to consequential loss, anticipated savings, loss of revenue).

  • Page 5: Safety Considerations

    The display layouts and screenshots within this document are for illustrative purposes and may differ from the actual displays on your phone. Panasonic reserve the right to change the information in this document without prior notice.
  • Page 6 – this does not affect your statutory rights. This equipment should only be used with Panasonic approved accessories to ensure optimum performance and avoid damage to your phone. Panasonic is not responsible for damages caused by using non-Panasonic approved accessories. This Panasonic mobile...
  • Page 7 Important information European union - RTTE THIS PANASONIC PHONE (MODEL EB-X70) MEETS THE EU REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by The Council of the European Union.

  • Page 8: Care And Maintenance

    Care and maintenance Pressing any of the keys may produce a loud tone. Avoid holding the phone close to your ear while pressing the keys. Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. If you use your phone in a temperature over 40°C for a long time, the display quality may deteriorate.
  • Page 9 Care and maintenance Always charge the battery in a well ventilated area, not in direct sunlight, between +5°C and +35°C. It is not possible to recharge the battery if it is outside this temperature range. When connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions.

  • Page 10: Overview Of Features

    Overview of features Your phone has the following features: ® Bluetooth connectivity ® Use this to make and receive calls using wireless Bluetooth Headsets or Car Kits. Also to transfer data to and from PCs, Laptops, other mobile phones and devices that support ®...

  • Page 11: Sim And Battery

    SIM and battery Fitting and removing the SIM You insert the SIM into the back of the phone, underneath the battery. If your SIM contains contact details, the first time that you browse your contacts list after fitting a new SIM, you are asked whether you want to transfer the SIM data to your phone. Fitting the SIM Removing the SIM Fitting and removing the battery...

  • Page 12: Charging The Battery

    Charging the battery The battery must be fitted in the phone before you connect the charger. Press the button on the top of the connector and insert it into the base of the phone. Note: Do not force the connector as this may damage the phone and/or the charger. Connect the charger to the mains power supply.

  • Page 13: Quick Start

    Quick start Note: Some services are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Switching the phone on and off To switch the phone on or off, press and hold E. If you have set an animation and greeting, these are displayed.

  • Page 14: Taking A Picture

    Taking a picture When you are in camera mode, move the phone around until you can see the image you want on the preview screen. Press Q to capture the image. If you decide that you do not want the image that you have taken, you can press B to delete it.

  • Page 15: Using Your Browser

    Quick start Using your browser Before you can start using your browser, you need to contact your service provider. When your phone is set up to access the internet see Home page on page 70 for information about using the browser. Creating a multimedia message Use the Create option on the Messaging menu to create a multimedia (MMS) message.

  • Page 16: Creating A Text Message

    Creating a text message Use the Create option on the Messaging menu to create a text (SMS) message. Select Create > SMS. Enter your text. Press Q. Select Ok or Cancel. Press Q to send the message. Enter the phone number. Press Q.
  • Page 17 Select Pair. Enter the Bluetooth Note: The Passkey for Panasonic EB-BHX70 Bluetooth The Pairing will fail if you enter the wrong Passkey. Press Retry to try again. You can select Paired Devices to confirm that the devices are Paired. This lists all the devices that are Paired with the phone.
  • Page 18 Finally you need to Pair the devices: On the phone select Discover & Pair. As the phone Discovers devices it displays them on the screen. When the car kit name appears in the list you can select Stop to stop the search. If the phone does not Discover your car kit, press A to try again.

  • Page 19: Your Phone

    Your phone Ear Piece Left Soft Key Use to: Access the Contacts List from idle mode. Switch between text entry types. Select the option in the left hand selection area. Call Key Keypad @ Key Use to: Go to the Browser default home page from idle mode.
  • Page 20 Your phone Camera Lens Self-portrait Mirror Memo Key / Camera Shutter Key Photo Light Case Screen Personal Handsfree Connector Infrared...

  • Page 21: Display Icons

    Display icons After some operations, the display automatically clears after three seconds or when you press any key. Status icons The status icons are displayed according to the currently activated functions. The antenna, GSM signal strength and battery icons are displayed when the phone is switched on and connected to a network.
  • Page 22 Registered to a non-home network - Roaming. The selected line number of the current call when using a SIM that has two lines. This is SIM dependent. M The call you are currently listening to when you are connected to more than one call.

  • Page 23: Menu Structure

    Menu structure The nine main menus are as follows: Note: The menus may not display in the same order or with the same icons as listed here. The order and icons vary according to your service provider. Settings Contacts List 1 Display 1 Browse 2 Alerts...

  • Page 24: Navigation Key

    Navigation key The navigation key is a multi-function key. You use the top, bottom, left and right edges to move around the display. These actions are indicated by b, a, d and c in this user guide. You press the centre of the navigation key Q to: Access the menu system.

  • Page 25: Voice Calls

    Voice calls Making calls Ensure that the phone is switched on, the network operator logo is displayed, and the antenna and signal strength icons (ST) show that network coverage is available in the current area. From idle mode, enter the area code and phone number. Press D.

  • Page 26: Making International Calls

    Making international calls If you know the international number, you can enter it in the normal way, followed by the area code and phone number. You can use the automatic international access code (+), to dial international numbers without knowing the code for the international exchange. From idle mode, press and hold 0 until + is displayed.

  • Page 27: Receiving Calls

    Voice calls Voice calls using Bluetooth Making calls You can use voice dial (see Creating a voice dial entry on page 61 for instructions on how to use voice dial). to make voice calls from your Bluetooth pressing any keys on your phone. With some headsets and car kits you can also redial the last number (refer to your headset or car kit instructions for details).

  • Page 28: Rejecting Calls

    Rejecting calls To reject an incoming call: Wait until the headset or car kit rings. Press and hold down the main function key on the EB-BHX70 headset until you hear a low tone, or press the red end button on most car kits. Transferring calls from handset to Bluetooth If you make a call using your handset, you can transfer the call to your headset or car kit once the call is connected.

  • Page 29: Displaying Caller Id

    Voice calls Displaying caller ID Note: This is network dependent R. If the caller’s number and name are stored in your Contacts List, they can be displayed during an incoming call. Note: Caller ID may not always be available. Setting the ear piece volume During a call press e to adjust the ear piece volume.

  • Page 30: Making A Second Call

    Making a second call Note: This is network dependent R. If Call Waiting is enabled, you can make a second call. You can check your call waiting status from Settings > Call Service > Calls > Call Waiting. Note: You cannot make more than one fax or data call at a time. You must end all voice calls before you can make or receive a fax or data call.

  • Page 31: Swapping Between Calls

    Voice calls Operating during two calls Swapping between calls An icon (J) indicates the current call, when connected to two calls. Press Q. Select Swap to change to the other call. Ending current call Press Q. Select End. Ending both calls Press E.

  • Page 32: Adding People

    Adding people You can add people to the multi-party call (up to a maximum of five), either by making a call or accepting an incoming call. You can then merge the new call into the multi-party. Press Q. Select Merge. Note: When you make a call or accept an incoming call, the multi-party call is placed on hold.

  • Page 33: Using The Notepad

    Voice calls Using the notepad During a call you can enter numbers that you may want to dial when you have finished the call. You can make a note of these numbers on the notepad. Enter the number. When you have finished your call, press D to dial the number. Press A while the number is displayed to store the number in your Contacts List.

  • Page 34: Text Entry

    Text entry You use alphanumeric characters to enter details into the Contacts List, to create text and e-mail messages. There are five different text entry modes: normal (ABC or abc), Greek (V), extended alphabet (W), numbers (X) and T9 or select Menu > Input Mode, and select the mode that you want. The icon for the current mode appears in the information area on the display.

  • Page 35: Entering Text

    Text entry ® ® Using T9 reduces the number of key presses required. ® When in T9 mode: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached. Check that the word has been typed correctly before continuing to the next word.

  • Page 36: Editing Text

    Editing text Press e to move up or down one line of text. Press f to move left or right one character. Press B to delete the character to the left of the cursor. Press and hold B to delete the current line. If you move the cursor over a character and press another key, the new character is inserted immediately before the selected character.

  • Page 37: Settings

    Settings Use the Settings menu to personalise your phone. Display Wallpaper On/Off Show Setting the wallpaper The wallpaper is a picture that displays when the phone is in idle mode. Select Wallpaper. Select your picture. If your picture is not in the folder press B then select another folder. Changing the start up events The start up events are an animation that you can select and a greeting that you enter.

  • Page 38: Setting The Backlight Time

    Setting the backlight time The Backlight Time is the time that your screen remains lit when you are not using your phone. Select Backlight Time. Select from 10 seconds, 30 seconds and 60 seconds. Note: Setting the Backlight Time to 60 seconds, can reduce the talk and standby time of your battery.

  • Page 39: Operator Notice

    Settings Changing the contrast Select Contrast. Use e to move between 0 and 10. Select Ok. Changing the backlight colour You set the backlight colour, to see what type of call you are receiving, or what mode you are in when the phone is closed. You can set the backlight colour for: Alarm/Schedule Voice Calls Fax Calls...
  • Page 40 Alerts Ring Ring Type Quiet Volume Mode Changing the ring volume You can change the ring volume so that you can hear your phone ring. For example, in a noisy environment you may want to set the volume to maximum. Select Ring Volume.
  • Page 41 Settings Setting a vibration alert If you set a vibration alert, the phone vibrates when you receive a call or message. This setting is separate from the vibration alert that you set for quiet mode. Select Vibration Alert. Select from Continuous, Intermittent and Off. Creating a ring type Select Melody Composer >...

  • Page 42: Setting Auto Answer

    Once you have saved your melody you can edit it. Select Edit from the Melody Composer menu. Select the data folder where your melodies are stored. Select the melody you want to edit. Select Edit. Use the relevant keys to insert new notes and rests. Note: The only restriction on the number of melodies you can compose is the space remaining in your data folders.

  • Page 43: Setting The Keyguard

    Settings Setting the keyguard The keyguard stops the keypad being accessed. Note: When the keyguard is on, you must turn it off before you can use the phone. Select Keyguard. You are asked ‘Guard Keypad?’. Press Q. You can also set the keyguard directly from the idle screen: Press and hold down Q.

  • Page 44: Phone Settings

    Phone settings Language DTMF All Tones Length Changing the language You can change the language that the phone uses for display messages and text entry. Select Language. Select DisplayLanguage or Tegic Language. Select the language. Note: Tegic language is the language used by T9 ®...

  • Page 45: Setting The Clock

    Settings Editing user messages The phone contains some standard user messages that you can send to other people. You can edit these messages to suit you. Select User Messages. Select the message you want to edit. Edit the message. Clock Clock Set Current Location...
  • Page 46 Auto adjusting the time difference If you are away, in a country with one time zone, then the time difference can be adjusted automatically. Select Clock Set > Auto Adjustment > On. The phone gets your location from the local network provider, and adjusts the clock automatically.

  • Page 47: Call Service

    Settings Disabling the power on and off times Select the power on or off time. Select the frequency option. Select Disabled. Press A to save your alarm settings. Highlight the power on or off time. Press A to cycle through Repeat Daily, Once or Disabled. Stop at Disabled.
  • Page 48 Viewing the combined length of all your outgoing or incoming calls Select Calls > All Calls Timer. Select Incoming or Outgoing. The combined length of all your incoming or outgoing calls since the timer was last reset, is displayed. Once you have seen the total time you can reset the timer: Press Q.
  • Page 49 Settings Viewing the combined details of your previous connections Select Connections > All Connections. The combined length of all your incoming or outgoing calls since the timer was last reset, is displayed. Once you have seen all the details you can reset the total time and data: Press Q.
  • Page 50 Setting the maximum unit level Use this to set the maximum cost of the calls that you can make. Select Service Charges > Max Cost. Select Menu > Edit. Enter your PIN2. Enter the maximum number of units (the corresponding cost is displayed). Note: The duration of one unit may vary during the day at peak and off-peak times.

  • Page 51: Call Divert

    Settings Sending your number Note: This is network dependent R. If your network supports this function, you can decide whether you want your phone number to be sent when you make a call. Note: You must be registered with a service provider before you can choose to send your number.

  • Page 52: Changing The Phone Lock Code

    Security Phone Lock Call Bar Setting and cancelling the phone lock Note: You can also set the phone lock by holding down Q on the idle screen, then following the instructions below. When the phone lock is set you can only use the phone to receive incoming calls and to make emergency calls.

  • Page 53: Changing The Password

    Settings Setting and cancelling call bar Call barring restricts certain types of incoming and/or outgoing calls, using a password provided by your service provider. When you check the status of the Call Bar, your phone must be registered with a network. You can set call barring for voice, fax and data calls. Select Call Bar.

  • Page 54: Changing The Pin

    Enabling and disabling PIN and PIN2 The PIN protects your phone against unauthorised use. If you enable the PIN, you have to enter it every time you turn on the phone. You need PIN2 to set fixed dial numbers. Your PIN and PIN2 are supplied by your service provider. Note: If you enter the PIN or PIN2 incorrectly three times, the phone will lock and you will need to enter the PUK or PUK2 code.

  • Page 55: Changing To A New Network

    Settings Enabling and disabling fixed dial Fixed dial is part of the Contacts List, but with added security. When you enable fixed dial: You can only dial numbers that are in the fixed dial store If you manually dial a number, it must match one in the fixed dial store. If you store, edit or delete a phone number, you have to enter your PIN2.

  • Page 56: Search Mode

    Settings Search mode You can set the Search Mode to Automatic or Manual. When the Search Mode is Manual, the phone only uses the selected network. If coverage is lost, you need to select another network. When the Search Mode is Automatic, the phone automatically reselects a new network to maintain network availability.

  • Page 57: Contacts List

    Contacts list Use the Contacts List menu to store a person’s phone numbers, e-mail addresses, company name, picture and other information. You can also set up how your contacts list is organised and displayed. Browse This menu only applies to contacts stored on your phone. For contacts stored on the SIM see SIM on page 65.

  • Page 58: Creating A New Contact

    Create Note: When you create or edit any entries, you must remember to press A to save your changes, or they will be lost. Creating a new contact Select an item. Enter the data using the keypad, or select an item from the list available. For each contact you can enter: Item Number of characters...
  • Page 59 Contacts list Note: Location is the location number in your Contacts List. If you put a contact in a group which has a ring type, case screen colour and vibration alert, then these options are not available for the individual contact. Entering DTMF digits in a phone number You can enter DTMF digits at the end of a phone number, so that these numbers are automatically sent after the main phone number.

  • Page 60: Voice Dial

    Voice dial With voice dial you can save a number using your voice. You can then dial the number by saying the name that you want to call. Creating a voice dial entry Select Voice Dial. Select Add. Select a contact. Select Recall.

  • Page 61: Creating A Group

    Contacts list Editing a voice dial entry Select Voice Dial. Select an entry. Select from Add, Play and Delete. Add. Add a new Voice Dial entry. Play. Listen to the recording for the selected entry. Delete. Delete the selected entry. Groups From the Groups menu, you can set up groups of contacts.
  • Page 62 Adding and removing members Once you have created a group, you can add or remove members. To add a new member: Select the group on the list. Select Members from the menu. Select Add. Select a contact from your list. Highlight the group on the list.
  • Page 63 Contacts list Settings Sort by Display by Setting how to sort or search entries You can choose how to sort and search the entries in your Contacts List. Select Sort by or Display by. Select First Name or Last Name. Setting how to display entries You can choose how to display the entries in your Contacts List.
  • Page 64 This shows the contacts stored on your SIM. View Recall Note: When you create or edit any of your entries, you must press A to save your changes, or they will be lost. View. Displays all the details for the entry you selected. You need to scroll down the screen to see all the information.
  • Page 65 Contacts list Creating barred dial number entries Note: Before you can create a barred dial number entry you have to enable Barred Dial (see Enabling and disabling barred dial on page 56). When you enable barred dial you can no longer dial the numbers that you entered as barred dial numbers.

  • Page 66: Games

    Games The games that are on your phone are network dependent. If you have four games listed then you have embedded games and should follow the instructions in the Embedded games section. If you have one game listed then you have downloadable games and should follow the instructions in the Downloadable games section.

  • Page 67: Downloadable Games

    Games Vibrations If you turn vibrations on, the phone vibrates when a target is hit in the game. You can select from On and Off. Backlight Use this to set your key backlight. You can select from Off, On 30s and Always on. Note: If you select Always on, this may affect the talk and standby time of your battery.

  • Page 68: Browser

    Browser Use the Browser menu to access Internet services supported by the network, such as news, weather reports and sport. Server list Before you can access the Internet, your SIM must be data enabled and the configuration information must be entered. Note: The configuration information may have been pre-programmed by your service provider.

  • Page 69: Home Page

    Browser Home page To start the browser, select Home Page (to start the browser from idle mode press the jkey). This opens the browser at your service provider’s home page. This is recalled from the cache each time you start the browser. The cache is the phone’s memory where pages that you have previously downloaded are stored.

  • Page 70: Adding A Bookmark

    Navigating pages Scroll up one line at a time. Focus on a link if there is one. Scroll down one line at a time. Focus on a link if there is one. Focus on the previous link. If there is no previous link, it behaves like b. Focus on the next link.

  • Page 71: Enter Url

    Browser Grouped bookmarks If you have set your bookmarks to display in groups (see Bookmarks on page 73), then you can highlight a group and select Menu, to make changes to that group. The options are: Edit Title. Change the title of the group. Display.

  • Page 72: Last Status

    Arranging the colour You can set the colours for your background, text, visited site and new site. Select Arrange Colour. Select from Background, Text Colour, Visited Site or New Site. Select a colour. Enabling and disabling the browser images If you disable browser images, pages display more quickly. Select Browser Images.

  • Page 73: Camera

    Camera Note: Before you use the camera you should set the date and time. See Setting the clock on page 46. You can take pictures with the built-in camera, and send them in multimedia (MMS) and e-mail messages, or use them as wallpaper. Changing to camera mode To change to camera mode either select Camera from the main menu, or press B from idle mode.

  • Page 74: Saving A Picture

    Taking a self-portrait You can take a self-portrait using the shutter button on the side of the phone. Ensure that the phone is in camera mode. Close the phone. View the image in the self-portrait mirror. Press the shutter button on the side of the phone. You can use this image in the same way as any other picture that you take with the camera.
  • Page 75 Camera Editing the picture When you have finished editing the picture, you must press Q to save your changes. Select Edit. Press A. Brightness Effect Changing the brightness Select Brightness. Press c to make it lighter or d to make it darker. Changing the effect Use this to change your picture’s colours by using an effect.

  • Page 76: Brightness Adjustment

    Changing the format Select Format. Choose from JPEG Fine, JPEG Normal, JPEG Economy and PNG. JPEG Economy produces a small file but with a low resolution. JPEG Normal produces a file which is acceptable for most uses. JPEG Fine and PNG produce large files with high resolution. Trimming your picture Use this to select and save just a small part of your picture.
  • Page 77 Camera Changing brightness after taking a picture See Changing the brightness on page 76. Preview screen menu Photo Light Twilight These are all set up using the same basic method: When the required image is shown in the preview screen, press A. Select the required option.

  • Page 78: Capture Mode

    Camera Capture mode With Capture Mode you can choose from: Single Shot takes a single picture. Multi Shot captures images at 1 second intervals while you hold Q down, to a maximum of six images. Self Timer delays the taking of an image. Remote takes a picture immediately, then returns to the capture screen.

  • Page 79: Messaging

    Messaging From the Messaging menu you can send and receive MMS, SMS and e- mail messages. The nine menus are as follows: Settings Inbox 1 MMS 1 MMS 2 SMS 2 SMS 3 e-mail 3 e-mail e-mail Data Folders 1 Send/Receive 1 My Pictures 2 My Sounds 3 My Themes...
  • Page 80 Configuring MMS Note: Your MMS settings may have been pre-configured by your service provider. MMS may not work if you change these settings. You must configure your MMS before you can send or receive MMS messages. You can create up to three server profiles on the phone. Server Auto Profile...
  • Page 81 Messaging Setting send options Req. Deliv. Recpt You set send options to determine what happens to messages that you send. Req. Deliv. Recpt. Decide whether or not you want confirmation that your message has been delivered. Select Yes or No. Req.
  • Page 82 Setting the font size You can set the font size to use in your messages. Select Font Size. Select from Large, Standard and Small. Setting what is displayed You can decide whether to display the subject or the address in your inbox and outbox. Select Display.
  • Page 83 Messaging To send your message, press A or press Q and select Send. To save your message press Q and select Save. Your message is stored in the Outbox, so you can send it or edit it later. You can send a camera image, text, a picture from a data folder and/or a sound from a data folder.
  • Page 84 Inbox The messages you receive are stored in the Inbox. Select Inbox > MMS. If there are messages waiting, a number appears by Waiting. You need to retrieve these messages before you can play any audio files attached to them. Retrieving a message Select Waiting.
  • Page 85 Messaging Reading received messages Once you have retrieved a message, you can view it and play attached audio files. Select Receive. Highlight a message. Press A to play the message. Read Save Addr Play When you select a message from the Receive menu, you can choose from: Read.
  • Page 86 Sort. Sorts your messages. Display. Displays the selected message. Delete. Deletes the selected message. Keep. Keeps a message for you to read later. Delete All. Deletes all messages. SMS is usually called text messaging. With text messaging you can send and receive text. You can receive, display, edit and send text messages of up to 459 characters to mobile phones on your service provider’s network or any network that has a roaming agreement.
  • Page 87 Messaging Recipient group You can preset the destination of text messages. There are five recipient groups. You can store up to ten destinations in each group. To name or rename a group: Highlight a group number or name. Press Q. Select Rename.
  • Page 88 Review You can see how many messages are stored in your SIM or in your phone. You can store up to 15 messages in your SIM (depending on your SIM), and 200 in your phone. If your SIM storage is full or nearly full, you can move messages to your phone storage. To move a message from SIM to mobile: Select Inbox >...

  • Page 89: Message Options

    Messaging Sending SMS to a fixed line There are the following special requirements when you send an SMS message from your mobile phone to a fixed line phone. Sending a new message Enter your message text, and include the fixed line number somewhere in the message.
  • Page 90 If you receive a voice call while you are in chat mode, you can accept the incoming call and return to chat mode at the end of the call. To save a chat message session select Menu > Save. Move. Move the message to your phone or SIM memory. Delete.

  • Page 91: Message List

    Messaging Broadcasts Broadcasts are messages sent on a variety of subjects by your service provider. Topics Before you can receive broadcasts, you need to specify the topics of information that you want to receive. Select Topics. Press Q. Select Insert. Use e to page through the list of available topics.

  • Page 92: Sms Chat

    SMS chat With SMS Chat you can read sent and received messages with another party on one screen. Use this to start a call in chat mode. Enter the phone number you want to chat with. To enter a number using the keypad: Enter the number, then select Menu >...
  • Page 93 Messaging e-mail You can send and receive e-mails via the mail servers of an Internet Service Provider (ISP) that supports POP3/SMTP protocols. Before you can use the Internet e-mail feature your SIM must be data enabled, and you must have a contract with an ISP. Settings The following functions are all available from Settings >...

  • Page 94: Settings Options

    Server profile option POP3 Setting Bearer Type Primary DNS Secondary DNS Note: Once you have set up a server you need to select the new server and select Set to activate the new setting. Settings Options POP3 server User ID Password Mail delivery Leave Msg...
  • Page 95 Messaging Options Send Options Recipient Signature Group Recipient Group. Use to preset the destination of e-mail messages. There are five recipient groups. You can store up to ten destinations in each group. Signature. Use this to insert essential information in outgoing messages, for example, disclaimer.
  • Page 96 User messages You can enter one of the predefined user message in your e-mail message: Select Menu > User Msg. A list of the user defined messages is displayed. Select the message you require. Press Q. To edit a user message, see Editing user messages on page 46. Send/Receive You can send and receive e-mails at the same time.

  • Page 97: Voice Mailbox

    Messaging Message status The following icons indicate the status of a message: Read or sent message. Unread or unsent message. Message is locked. & Broken message that is too long for the phone, or the message contains an attachment. Received messages options With the message displayed, press A.
  • Page 98 Data folders You can access your Data Folders directly from the top level menu. For details on the Data Folder options, see Data folders on page 100. Managing your inbox and outbox When your Inbox or Outbox is full, any new messages that you create or receive will overwrite existing messages, starting with the oldest.

  • Page 99: Data Folders

    Data folders Use data folders to store your pictures, sounds and themes. There are three predefined folders for My Pictures, My Sounds and My Themes. These may contain preloaded files. There are five empty folders. You can customise any of these folders.
  • Page 100 Editing stored pictures From the Edit menu you can change the Brightness, Effect, Frame, Size, Format and Trim of a stored picture. When you have edited the picture, press A to save your changes. Select the folder where your pictures are stored. Select the picture that you want to edit.
  • Page 101 Data folders Copying or moving a picture Select the folder where your pictures are stored. Select the picture that you want to copy or move. Press Q. Select Copy or Move. Select the folder to move or copy to. Note: The default folder is the last one that you copied or moved to. You cannot use this for predefined wallpaper files.
  • Page 102 Sending a picture via Bluetooth Select the folder where your pictures are stored. Select the picture that you want to send. Press Q. Select Bluetooth. ® Select the Bluetooth device from the list of Paired Devices or select Find to Discover another Bluetooth Note: You cannot use this for predefined wallpaper files.

  • Page 103: My Sounds

    Data folders My sounds Play Edit Note: The functions available depend on the type of sound file. Playing stored sounds Select the folder where your sounds are stored. Select the sound that you want to play. Press A, or press Q and select Play. Editing stored sounds Select the folder where your sounds are stored.

  • Page 104: Deleting A Sound

    Renaming a sound Select the folder where your sounds are stored. Select the sound that you want to rename. Press Q. Select Rename. Remove the existing text using B, then enter the new name. Note: You cannot use this for polyphonic ring types or music files. Copying or moving a sound Select the folder where your sounds are stored.
  • Page 105 Data folders Sending a sound via Bluetooth Select the folder where your sounds are stored. Select the sound that you want to send. Press Q. Select Bluetooth. Select the Bluetooth Discover another Bluetooth Note: You cannot use this for polyphonic ring types or music files. Viewing the sound properties You can see the file name, the date and time that it was created, its size, whether or not it is copyrighted and whether or not you can forward and copy the sound.

  • Page 106: My Themes

    My themes The phone has seven predefined themes. A theme contains a colour scheme. It may also contain a wallpaper and/or a ringtone. You use a theme to change the look and feel of your phone. Note: The seven predefined themes only contain a colour scheme. They set the colours used on your screen.

  • Page 107: Slide Show

    Downloading wallpapers, ringtones and themes You can download images to use as wallpaper, melodies to use as ringtones and themes to change the look of your phone. The Panasonic website is http://www.panasonicbox.com. Note: The Panasonic Box service is country and network operator dependent.
  • Page 108 Before you can download any files you need to register with Panasonic Box. Go to http://www.panasonicbox.com. Select your region. Click on User Registration. Follow the instructions on the screen. To access the site from your phone, you need to save the URL as a bookmark.
  • Page 109 107. To set up the ringtone associated with your theme, see Using the sound as your ring type on page 106. Note: Not all downloadable themes on Panasonic Box have ringtones. Some contain only a colour scheme and a wallpaper.

  • Page 110: Organiser

    Organiser The menus are as follows: Synchronization Contacts List 1 Sync Schedule 1 Browse 2 Sync Contacts 2 Create 3 Server List 3 Voice Dial 4 Restore Schedule 4 Groups 5 Restore Contacts 5 Settings 6 SIM 7 Storage Calculator Alarm Synchronization Use this to synchronize your Contacts List and Schedule with data on an...
  • Page 111 Organiser Profile Name For Circuit Switch, select Set, then select Edit and set: Digital Dial number Analogue Dial number Circuit Type. Select from Digital and Analogue. User ID User Password For GPRS, select Set, then select Edit and set: Access Point Name User ID User Password Authentication.
  • Page 112 You need to set: Profile Name. This can be whatever you want to call the connection. Server Name. Enter the server URL. Server Database. Enter the name of the database. Server User ID. Enter your user ID. Server Password. Enter your user password You can just send changes to the external database, or send all your records to the external database.

  • Page 113: Converting A Value

    Organiser Contacts list This accesses the same options as the Contacts List menu on the main menu. See Contacts list on page 58 for information on these options. Converter Use the converter to convert from/to a home currency using a conversion rate that you enter.
  • Page 114 You can enter the following information: Item Number of characters First name Last name Home number Work number Mobile number Other number Home e-mail Work e-mail Other e-mail Title Company name Note Photo Select a picture from the list or take a picture with the camera. Send your details to a Bluetooth Select Bluetooth.

  • Page 115: Creating A Reminder

    Organiser Schedule Use the schedule to register reminders for events and for planning holiday periods. Caution: You need to ensure that any settings made in the schedule will not automatically power on the phone when you are in an aircraft, medical facility etc.

  • Page 116: Setting A Holiday Reminder

    Setting a holiday reminder Select Menu > Options. Select Holiday Set. Select Day or Day of the week. Press and hold B to remove the current date. Enter the new date. Repeat for each day of holiday as required. Note: Dates that you set as holiday dates are shown in red. Deleting holiday reminders Select Menu >...

  • Page 117: Setting An Alarm

    Organiser Calculator The four function calculator performs simple calculations - addition, subtraction, multiplication and division. Select Calculator. Enter a number (maximum 10 digits). Use g to select the arithmetic operator. Enter another number (maximum 10 digits). If the calculation is complete press A to get the result. If the calculation is not complete, enter numbers and arithmetic operators, until the calculation is complete, then press A to get the result.

  • Page 118: Recording A Conversation

    Disabling an alarm Select an existing alarm time. Select the frequency option. Select Disabled. Press A to save your alarm settings. Highlight an existing alarm time. Press A to cycle through Repeat Daily, Once or Disabled. Stop at Disabled. Press Q then A to save your alarm settings. Memo Use the Memo to record a two-way conversation during a call, and to use the phone as a voice recorder.

  • Page 119: Deleting A Recording

    Organiser Playing back a recording Select Playback. Select a recording. To stop playing press Q twice. Note: You can use the notepad during play back, see Using the notepad on page 34. Volume control during play back While playing back a recording, use e to adjust the volume. Deleting a recording Select Delete.

  • Page 120: Connect

    Your phone can be used as a modem to connect a laptop or desktop PC to the Internet via Bluetooth®, infrared or USB Data Cable. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website www.panasonicmobile.com/support/software.
  • Page 121 The pairing will fail if you enter the wrong Passkey. Most Bluetooth kits use a fixed 4 digit Passkey, e.g. the Passkey for the Panasonic EB-BHX70 headset is 0000. For other devices such as a PC, laptop or another mobile phone that don’t use a fixed Passkey enter the same Passkey on both devices.
  • Page 122 Making the phone Discoverable You can also Pair with another Bluetooth and letting the other Bluetooth Discoverable: Select Make D’coverable. Select Start. Your phone will be Discoverable for five minutes. While the phone is Discoverable, the ® Bluetooth icon flashes. If you Pair your devices in less than five minutes you can turn off Discoverable mode: Select Make D’coverable.
  • Page 123 ® Your Bluetooth name is the name reported to other Bluetooth or exchange data with your phone. By default the name is Panasonic X70 but we recommend that you change it. To view your Bluetooth To edit the name select Menu > Edit.
  • Page 124 Note: Installation instructions for your computer may vary depending on your computer’s operating system, web browser, Bluetooth Adaptor, etc. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website www.panasonicmobile.com/support/software. ® Installing Bluetooth on your computer If your computer does not have Bluetooth Get a Bluetooth USB or PCMCIA adaptor.
  • Page 125 Select Start > Programs > Panasonic Data Connection Assistant > Data Connections. If you are using a circuit switched connection: Select Make New Connection. Select Modem - (Panasonic X70 or Bluetooth COM port from the Select a Device window). Enter the phone number for your Internet Service Provider (ISP).

  • Page 126: Infrared Dialup

    Install the Data Connection Software on your computer. See Installing the Data Connection Assistant software on page 126. Set up your computer’s fax application software to send and receive faxes via your phone. Ensure that you select the Panasonic X70 Bluetooth application. Infrared dialup You can use the infrared connection to transfer information between your phone and another device with an infrared port.
  • Page 127 Connect Sending objects via infrared You can send data from Contacts List, Data Folders and Business Card. For Contacts List, select > Contacts List > Browse > Infrared. For Data Folders, highlight the object you want to send. Press Q. Select Infrared. For Business Card, select Organiser >...
  • Page 128 Data Connection Assistant software on page 126.) Set up your computer's Fax application software to send/receive faxes via your phone. Ensure that you select the Panasonic X70 infrared modem port in your Fax application. USB charge data cable (EB-UCX70) You can connect your phone to your computer with the USB charge data cable (EB- UCX70) With this you can: Access the Internet from your computer, using your phone as a modem.

  • Page 129: Accessories

    Accessories Bluetooth headset (EB-BHX70) ® Car charger (EB-CDX70) Car holder (EB-KAX70) Carry case (EB-YKX70) ® You can use a Bluetooth Headset to make handsfree calls within approximately 10 metres of your phone. Top up your battery in your vehicle by attaching this to your cigarette lighter socket.
  • Page 130 Fast travel charger (EB-CAX70UK) Carry this wherever you go so you can always recharge your battery. Fast travel charger (EB-CAX70EU) Li-Ion battery (EB-BSX70) Double your talk time by having a spare battery. Personal handsfree (EB-EMD87) Talk and move while keeping your hands free, by using a personal handsfree.
  • Page 131 PC and synchronize it back to the phone. This information includes contacts, messages, calendar and the image or sound data held in your X70. For further information please refer to the documentation on the CD-ROM, or to the Panasonic website www.panasonicmobile.com/support/...

  • Page 132: Troubleshooting

    Troubleshooting Please contact your dealer, if any problem persists, or if your problem is not dealt with here. Problem Phone will not switch on. Short battery life for a new battery. Short battery life for an old battery. The charging indicator does not light, the battery level indicator does not appear and the phone...
  • Page 133 Troubleshooting Problem Charge fault icon (F) on phone with charge LED off, while charging the battery. Calls cannot be made. Calls cannot be made from Fixed Dial Store. Calls cannot be received. Emergency calls cannot be made. Phone numbers cannot be recalled from Contacts List Cause...

  • Page 134: Important Error Messages

    Problem X70 does not Discover ® another Bluetooth device. X70 fails to Pair with ® another Bluetooth device X70 is not Discovered by ® other Bluetooth devices Call is terminated when closing the phone Important error messages These are some of the important error messages which may be displayed.
  • Page 135 Troubleshooting Message Rejected Store Full. Phone Number Too Long (Max:20). Warning Store Full Continue? Verification Failure. Incorrect Lock Code. Incorrect PIN/PIN2/PUK/ PUK2. Auto Redial List Full. A message has been received but the message store is full – to receive messages, delete some of the currently stored messages or set messages to Auto Delete.

  • Page 136: Glossary

    Glossary Access Point Name. Gateway from GRPS network to other networks, e.g. Internet. Short range wireless connection for voice and data transfer. ® Bluetooth CHAP Challenge Handshake Authentication Protocol. A security feature for the GPRS network. Circuit Switched Data. Connection method used by your phone for data services such as web browsing, e-mail and fax.
  • Page 137 Glossary Passkey Password PIN2 PUK/PUK2 Registration Roaming Service Provider A one to sixteen digit number entered when Pairing Bluetooth devices. Used as a security measure to prevent unauthorised Pairing. Also known as PIN, Password or Passcode by other manufacturers. Used for the control of the Call Bar. Supplied by your service provider.

  • Page 138: Specifications

    Specifications Bands supported ....GSM900 Class 4, GSM1800 Class 1 Standby Time ..... . 75 – 250 hours ®...
  • Page 139 Specifications Audio Formats Supported ... . . MIDI, iMelody, AMR, SMAF, WAV Note: Limitation of MIDI: Format 0 and 1 are supported Limitation of SMAF: 16 polyphonic SMAF Limitation of WAV: CD quality WAV (16 bit Linear PCM/44.1kHz/stereo) is not supported.

  • Page 140: Eu Warranty And Licensing

    Service Guarantee only applies while travelling in countries other than where the product was purchased. Your local guarantee is applicable in all other cases. If your Panasonic GSM telephone requires service while abroad, please contact the local service company shown on this document.
  • Page 141 EU warranty and licensing Panasonic Service Center Berlin SERKO GmbH Schwedter Straße 34a 10435 Berlin Tel. +49 (0)30/ 44 30 322 Panasonic Service Center Berlin RUESS SYSTEMS Thrasoltstraße 11 10585 Berlin Tel. +49 (0)30/ 342 2013 Panasonic Service Center Rostock warnow electronic service gmbh An der Jägerbäk 2...
  • Page 142 Panasonic Service Center Eisenach Blitz Electro-Electronic-GmbH Bahnhofstraße 17 99817 Eisenach Tel. +49 (0)3691/ 29 29 42 8 Panasonic Service Center in Österreich Frisch Lokahlbahnweg 12 4060 Leonding Tel. +43 7326 76961 CETELEC FI de la Delorme 5 Avenue Paul héroult 13015 MARSEILLE Tél.
  • Page 143 104 22 Stockholm Tel. +46 08-6542500 CR service Industribyn 3 232 37 Malmö Tel. +46 040-430030 Huoltokeskukset Suomessa: KAUKOMARKKINAT OY PANASONIC- HUOLLOT Kutojantie 4 02630 Espoo Puh. +358 09 521 5151 Huolto Puh. +358 09 521 5155 Varaosat Ja Tarvikkeet SETELE OY...
  • Page 144 HENROTTE Rue du Campinaire 154 6240 FARCIENNES Tel. +32 071/39 62 90 PIXEL VIDEOTECH Rue St Remy 7 4000 LIEGE Tel. +32 041/23 46 26 DELTA ELECTRONICS Rue P.d’Alouette 39 5100 NANINNE Tel. +32 081/40 21 67 ELEKSERVICE FEYS Houthulstseweg 56 8920 POELKAPELLE Tel.
  • Page 145 EU warranty and licensing ANTALYA BRANCH OFFICE ALTINDAĞ MAH. 146 SOKAK ÖFKOÇ APT.NO:9/1-2A ANTALYA Tel: 90-242-243 23 70 / 3 Lines Fax: 90-242-243 23 72 DİYARBAKIR BRANCH OFFICE LİSE CADDESİ GÖKALP APT.NO: 18/A DİYARBAKIR Tel: 90-412-228 73 00 Fax: 90-412-223 59 00...
  • Page 146 EU/EEA – Wide Guarantee: Conditions applicable in any country other than the country of original purchase. When the purchaser finds the appliance to be defective, he should promptly contact the proper sales company or national distributor in the EU/EEA country where this guarantee is claimed, as indicated in the “Product Service Guide”...
  • Page 147 ® The Bluetooth word and mark are owned by the Bluetooth SIG, Inc. and any use of such marks by Panasonic is under license. Other trademarks and trade names are those of their respective owners. In-Fusio have developed specific software called ExEn for the purpose of downloading and playing games from mobile handset.

  • Page 148: Personal Settings And Notes

    Personal settings and notes Use the table below to record your GSM/GPRS WAP settings. Item Provisioning Information Setting No 1 Name Home URL Linger Time Gateway IP Non secure/ Security Secure (Delete One) Bearer Type Circuit Switched (GSM) Digital Dial # Analogue Dial Circuit Type User ID...
  • Page 149 Personal settings and notes Notes...
  • Page 150 The Serial Number can be found on the outside of the phone under the battery. For your convenience we recommend that you note the following details as a record of your purchase. Part Number Serial Number Dealer Name Purchase Date...

  • Page 151: Index

    Index Active flip ....45 Adjusting the time difference Automatically ... . 47 Manually .
  • Page 152 Call waiting status ... 49 Caller ID ....30 Caller’s ID status ... . 49 Camera Capture mode .
  • Page 153 Index Editing Sound ....104 Text ....37 User messages .
  • Page 154 Deleting ....120 Play back ....120 Recording a conversation . . 119 Memory information .
  • Page 155 Index SAR ..... . .8 Saving a picture ... . . 75 Schedule Changing the layout .

Table of Contents