Phone Settings; Changing The Language; Turning Tones On And Off; Active Flip - Panasonic EB-X70 Operating Instructions Manual

Phone settings

Language DTMF
Length

Changing the language

You can change the language that the phone uses for display messages and text entry.
Select Language.
Select DisplayLanguage or Tegic Language.
Select the language.
Note: Tegic language is the language used by T9
T9 text entry, see Entering text on page 36.
®
Changing the DTMF length
DTMF stands for Dual Tone Multi-Frequency. You can send DTMF tones during a
conversation to access voice mail, paging and computerized home banking. For example,
you may need to enter a number to remotely access voice mail messages.
If the DTMF tones are unsuccessful then the destination of your call may require that the
length of the tones be changed, as follows:
Select DTMF Length.
Select Long or Short.

Turning tones on and off

You can turn on or off all tones or just warning tones.
Select All Tones or Warning Tones.
Select On or Off.

Active flip

If you enable active flip, you can answer a call by opening the phone, end the call by
closing the phone and reject a call by pressing the memo/camera shutter key.
Select Active Flip.
Select On or Off.
Selecting camera tones
The camera tone is the sound the phone makes when you take a picture.
Select Camera Tones.
Phone Settings
All Tones Active Flip Warning Camera
Tones Tones
text entry. For more information on
®
Settings
User
Messages
45