Table of Contents
Advertisement
TROUBLE SHOOTING
Should your DVD player develop a problem, please check below before
requesting service:
Symptom
No Power
Does not play
No disc, load a disc.
Disc has been loaded upside down. Place the disc with the label side up.
Disc's region code does not match to the player.
Disc is not correct type for player.
Disc is damaged or dirty, clean the disc or try another disc.
Moisture may be condensed inside the player. Remove the disc and
leave the unit power on for one or two hours.
No Picture
Picture
noise / distorted
Picture not full
screen
Malfunction
No sound
All manuals and user guides at all-guides.com
Check and Action
Check if the power cord has been properly connected
Check if the main
power has
Check if the TV set has power on, use TV remote to select A/V signal for
DVD rather than broadcast.
Check if the system connection is proper and secure.
Check if the connection cables are damaged.
Clean the disc.
The disc is dirty or damaged. Clean the disc or try another disc.
Reset the color system of the player or the TV set.
Try to direct the player to the TV set instead of via other components,
such as a VCR.
Select the screen format from the player's SETUP MENU,
see " SETUP MENU " of t his manual.
Select the screen format from DVD disc menu.
Should the player develop a malfunction,
30 minutes. After 30 minutes, power on the player and the restore
function should reset
the player.
DTS disc used. Press the remote control "
re-select the audio
setting on the remote.
27
to the power outlet.
been switched on.
unplug the player for
" button
LANGUAGE
LANGUAGE
and
Advertisement
Table of Contents
