Creating a Dynamic Photo Image
Dynamic Photo images are created by extracting the subject out of one image, and
inserting it into another image (snapshot or movie). The term "subject" as used here
refers to what you extract or crop out of the first image. Perform the following steps to
shoot and extract the subject.
To extract the subject, you shoot once with the subject against a background.
Then you shoot the same background again, this time without the subject.
(Shoot twice.)
With the subject
1
1.
Turn on the camera and display the BEST SHOT scene menu screen.
2.
Select "Dynamic Photo".
On the BEST SHOT scene menu screen, select "Dynamic
Photo".
Use [4] and [6] to move the red frame
press the [SET] button.
Step 1: Shoot the subject.
The same angle against the same
2
background, without the subject.
Do not allow the camera to move.
5
The camera will extract
the subject automatically.
to
and then
Creating a Dynamic Photo Image