Audio Input Select And Level Adjustments; Selecting Audio Input; Audio Level Adjustments; Adjusting The Headphone Volume - Panasonic AG-DVC60 E Operating Instructions Manual

Audio input select and level adjustments

Selecting audio input

Use the AUDIO IN switch to switch input between the
built-in microphone, an external microphone, an exter-
nal microphone (XLR), and an external line (XLR).
ZOOM SPEED
H
OFF/M
L
AUDIO IN
FRONT
REAR
CH1 CH2
RESET
You can record simultaneously from CH1 and CH2 by
setting each for FRONT and REAR. You cannot, how-
ever, record simultaneously from the built-in micro-
phone and EXT MIC. (P53, Input channels and the
tracks recorded)
When using the built-in microphone
(FRONT)
1
Set the AUDIO IN switch to
FRONT and MIC.
When using an external microphone
(FRONT)
1
Connect the microphone to the
EXT MIC jack. (P51)
2
Set the AUDIO IN switch to
FRONT and MIC.
• The unit automatically switches to
the external microphone.
When using an external microphone
(XLR) (REAR)
1
Connect the microphone to an
XLR AUDIO IN jack. (P51)
• You can connect two micro-
phones, one each to the CH1
and CH2 jacks.
2
Set the AUDIO IN switch to REAR
and MIC.
When using an external line (XLR)
1
Connect the line to the XLR
AUDIO IN jacks.
2
Set the AUDIO IN switch to LINE.
• Change the WIND CUT setting to
OFF. (P69)
42 (E)
REC
COUNTER RESET
CH1
MIC
AUDIO LEVEL
LINE SNS MODE CHK
CH2
MIC
ZEBRA OIS
AUDIO IN
FRONT
REAR
CH1 CH2
AUDIO IN
FRONT
REAR
CH1 CH2
AUDIO IN
FRONT
REAR
CH1 CH2
AUDIO IN
FRONT
REAR
CH1 CH2

Audio level adjustments

You can adjust the level of the audio input
from a microphone and the headphone
volume to suit the shooting conditions.
You can adjust the AUDIO LEVEL dial up
to a maximum of 8dB.

Adjusting the headphone volume

1
Hold down the MENU button until the MONITOR
LEVEL SETUP screen appears.
jlkfqlo==ibsbi==pbqrm
jlkfqlo==ibsbi
|
x====z
mrpe==jbkr==ql==obqrok
2
MIC
Turn the multi dial to adjust the headphone volume.
LINE
MIC
jlkfqlo==ibsbi==pbqrm
jlkfqlo==ibsbi
|
x====z
mrpe==jbkr==ql==obqrok
MIC
LINE
"q" disappears when you press the multi dial and this
MIC
means you cannot make adjustments. "q" reappears
when you press the dial again to make adjustment pos-
sible again.
3
Press the MENU button to release the MONITOR
LEVEL SETUP screen.
MENU
MIC
LINE
MIC
MIC
LINE
MIC
MENU
m^rpb
||||
x=H=z
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
m^rpb
|
x=H=z
VOL/JOG
PB.
ZOOM
MENU
SET
ITEM
SELECT
VAR. PB.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
CH1
AUDIO LEVEL
CH2