Self-Cleaning; Care And Maintenance - KUKEN EASYCLEAN 6000 Instructions Manual

SELF-CLEANING

EasyClean can clean the rotating brush and tubing automatically on the self-cleaning base:
1) Make sure there is enough clean water in the tank, empty it of dirty water before self-cleaning.
2) Place EasyClean on the charging station (figure 12), plug in the power supply tightly.
3) Press the self-cleaning button (figure 13), the indicator will flash white slowly, self-cleaning will start.
4) Unplug the power supply and clean the dirty water tank after self cleaning is finished.

CARE AND MAINTENANCE

Unplug the power supply, turn off the switch and remove the battery before care and maintenance.
1. For daily care and maintenance, use a soft, dry cloth to clean the EasyClean components.
2 Cleaning the roller brush:
Release the rotary brush lock button, turn the brush counterclockwise, and then take out the brush, clean it and also clean the brush
guard with the cleaning tool.
3. Cleaning dirty water:
1) Press the dirty water tank release button and pull it out.
2) Pour the waste into the garbage can, pour the dirty water into the sink. Clean with clean water.
4. Cleaning the loading station and drying tray:
1) Unplug the power supply and take out the main body before cleaning.
2) Pour out the dirty water from the charging station, use a soft, dry mop to clean the charging station and drying tray.
5. Storage:
1) Dry the main body, clean water tank, dirty water tank, brush base, HEPA, Strainer, charging station, drying tray, then put them
away.
2) The rotating brush can be stored on the drying tray.
Tips:
• The dirty water tank should be cleaned and dried after each cleaning to avoid mold or odor.
• The machine should be stored in a dry and ventilated place without heat sources.
• Keep the machine out of direct sunlight.
• The battery should be fully charged every 3 months at least to avoid damaging the battery.
12
EN
13
27