Table of Contents
Advertisement
Base Unit Settings
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
Follow steps 1 to 4 on the previous page, then:
5
Select "Pause Time".
The factory preset is "Short".
Setting the Emergency Call Numbers
This is to enable you to make an emergency call even in call bar mode.
Follow steps 1 to 4 on the previous page, then:
5
Select "Emergency Call".
7
Enter Emergency Call Number.
(max. 24 digits)
The factory presets are 112 and 999.
78
6
Select "Short" (3 sec.) or "Long" (5 sec.).
6
Select "Emergency Call1" to
"Emergency Call5".
8
Press JOYSTICK.
Advertisement
Table of Contents
