Advertisement
Step Three
Insert centre rail (5) into the brackets in the centre of the headboard (1) and foot board (2). Push down fully and
secure in place using M6 x 25mm bolt (E) tighten using allen key M4 (A).
Centre Rail
E.
A.
M6 x 25mm
Step Four
Push the centre plastic caps (C) into the holes along the centre rail (5). Once in place, insert a slat (4) into the
centre plastic cap followed by a side cap (D). Finally push the side plastic cap into the holes on the side rail (3).
Repeat this process for all slats.
D
4
x30
5
4
D
M4
4
C
4
x15
C
4
D
5
M6 x 25mm
M4
4.
SlatS (30pcs)
C.
Centre Caps (15 pcs)
D.
Side Caps (30 pcs)
Advertisement
