__ 10. If you have more cards to move or want to install the card you removed in
__ 11. If you are finished moving and installing all cards, remove the wrist strap.
__ 12. Install the unit cover(s).
__ 13. Plug the system unit and system unit console into an electrical outlet. Plug
__ 14. Power on the workstation or PC that is your console.
__ 15. Is your system unit an AS/400e 270 or 820?
__ 16. Look at the Function/Data display on the control panel.
__ 17. Does 01 B N V=S appear in the Function/Data display?
__ 18. Look at the Function/Data display on the control panel.
__ 19. Does 01 B V=S appear in the Function/Data display?
18
AS/400e 270 or 820: Upgrading the System Unit from Operations Console to Twinaxial Console (5540)
another postition, go to step 3 on page 16 and repeat the steps to install the
next card.
in everything you previously unplugged such as printers and displays.
270
820
↓
Go to step 18.
No
Yes
↓
Do the following:
__ a. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ b. Press the Enter push button on the control panel.
__ c. Press the Increment/Decrement push button until B appears
in the Function/Data display.
__ d. Press the Enter push button on the control panel.
__ e. Press the Increment/Decrement push button until M appears
in the Function/Data display.
__ f. Press the Enter push button on the control panel.
__ g. Press the Increment/Decrement push button until S appears
in the Function/Data display.
__ h. Press the Enter push button on the control panel.
__ i. Press the Increment/Decrement push button until 01 appears
in the Function/Data display.
__ j. Press the Enter push button on the control panel.
01 B M S should appear in the Function/Data display. If it
does not, repeat steps 17a through 17i.
__ k. Go to step 7 on page 9.
Yes
No
↓
Do the following:
__ a. Press the Mode Select button until the Manual mode
indicator (a small hand) lights up.
__ b. Press the Increment/Decrement push button until 02 appears
in the Function/Data display.
__ c. Press the Enter push button on the control panel.
__ d. Press the Increment/Decrement push button until B appears
in the Function/Data display.
__ e. Press the Enter push button on the control panel.