Installations And Connections - Panasonic KX-PW501DL Quick Reference Manual

Installations and connections

Installing the ink film
1
Open the control panel and the back cover.
Open the control
1
panel until it locks.
2
Insert the ink film.
Find the "T" shaped gear (blue).
Insert the "T"
2
shaped gear
(blue) into the
left slot of the
main unit.
3 Insert the white core into the slots.
4
Open the back cover
3
until it locks.
Press here.
2
Ink film
Insert the blue
1
core into the
right slot of the
main unit.
Blue core
3
If the ink film is slack, tighten it by winding the "T"
shaped gear.
4
Close the back cover and the control panel until they
lock.
To close the back cover, press here.
1
Click
Close the control panel until it locks.
2
Click
When the unit runs out of ink film, the following
G
message will be displayed.
ﾌ ｨ ﾙ ﾑ ｶ ﾞ ｼ ﾅ ｸ ﾅ ﾘ ﾏ ｼ ﾀ
ｺ ｳ ｶ ﾝ ｼ ﾃ ｸ ﾀ ﾞ ｻ ｲ ｼ U 2 3
Install a new ink film.
Replacement ink film:
KX-FAN142 (35 m)
As of December 2003.
・
Do not
be slacken.
Click
ﾌ ｨ ﾙ ﾑ ｶ ﾞ ｼ ﾅ ｸ ﾅ ﾘ ﾏ ｼ ﾀ
ﾋ ﾝ ﾊ ﾞ ﾝ : K X - F A N 14 2
¥1250
Tax not included.
・