Installations And Connections - Panasonic KX-PW821DL Quick Reference Manual

Installations and connections

Installing the ink film
Insert the orange
gear into the left slot
of the main unit.
When the unit runs out of the ink film, the following message will be displayed.
ﾌｨﾙﾑがなくなりました U23
交換してください （ＫＸ-ＦＡＮ190）
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2)
KX-FAN191 (15 m) (*1)
KX-FAN191W (15 m X 2) (*1) ￥1,523
4
2
1
￥714
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
￥1,208
than does the KX-FAN190/190W.
￥893
・As of August 2010.
1
Open the control panel.
2
Open the back cover.
3
Insert the ink film.
Insert the white gear into the right slot
of the main unit.
4
If the ink film is slack, tighten it by
winding this gear (orange).
5
Close the back cover pressing
" " down on both sides
until it clicks into place.
6
Close the control panel.
・Tax included.