Installations And Connections - Panasonic KX-PW521XL Quick Reference Manual

Installations and connections

Installing the ink film
Insert the orange
gear into the left slot
of the main unit.
Glass
When the unit runs out of ink film, the following message will be displayed.

ﾌｨﾙﾑなし U23
交換してください
品番： ＫＸ−ＦＡＮ190
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2)
KX-FAN191 (15 m) (*1)
KX-FAN191W (15 m X 2) (*1) ￥1,523
4 4
Flat white surface
￥714
*1 KX-FAN191/KX-FAN191W leaves a fainter print trail on the film
￥1,208
than does the KX-FAN190/190W.
￥893
・As of January 2011.
1
Open the control panel.
2
Open the back cover.
3
Insert the ink film.
・ D o not place the ink film on the back side of
the control panel. Any ink adhering to the glass
or flat white surface may cause black or white
lines to appear on the recording paper or the
recipient's fax.
Insert the white
gear into the right slot
of the main unit.
4
If the ink film is slack, tighten it by
winding this gear (orange).
5
Close the back cover pressing
" " down on both sides
until it clicks into place.
6
Close the control panel.
・Tax included.