Changing The "Number Of Shots" Setting - Casio Exilim EX-H15 User Manual

Moving Subject
1sec (20fps)
Moving Subject
2sec (10fps)
Moving Subject
4sec (5fps)
Still Subject

Changing the "Number of Shots" Setting

Normally you need to shoot the subject you want to extract against a background and
then shoot the background again without the subject. When the subject is against a
plain background, however, you can extract the subject after shooting only once.
Perform the following procedure when you want to change the "Number of Shots"
setting.
1.
Before shooting the subject in step 3 under "Step 1: Shoot the
subject." (page 6), press [SET].
2.
Select "Number of Shots" and then press [SET].
3.
Use [8] and [2] to select the "Number of Shots" you want and then
press [SET].
To shoot under these conditions
The subject against a complex
2
background
The subject against a plain (no
1
pattern) background
Number of
CS speed
images
20 frames per
20 images
second
10 frames per
20 images
second
5 frames per
20 images
second
– 1 image
Creates a moving subject from the
CS images.
• The subject is cropped out of
each of the CS images.
• "Moving Subject 1sec (20fps)"
provides smooth subject
movement, but recording time is
limited to one second.
• "Moving Subject 4sec (5fps)"
provides more recording time,
but subject movement is slightly
rough.
Records a single subject, which is
cropped and inserted into the
background image.
Select this option
You need to shoot twice to extract the
subject.
You need to shoot only once to extract
the subject.
11
Subject type
Creating a Dynamic Photo Image