Copy Density Adjustment - Panasonic DP-6530 Operating Instructions Manual

4. COPY DENSITY ADJUSTMENT

There are two types of image density adjustments: automatic mode (default setting) and manual mode. In
the automatic mode, the sensors automatically detect the density of each original and select the optimum
image density. In the manual mode, you can select the desired level of image density. It is recommended
that lighter-density original be coped in the manual copy density mode.
Automatic Copy Density Mode
1
Place paper in the drawer(s).
2 Place the original(s).
3
Confirm that "AUTO" is displayed on the basic
screen.
- If the automatic density mode is not selected, press the
MANUAL key, then press the AUTO key on the next
screen.
Select other copy modes as required.
4
Press the START key.
Page 2-4
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
3-11