Advertisement
WHITE MAGIC
MODELS: WW JB 629 –13 A & WW JB 629 –H3A
8. The machine is now with thermocouple packing at the bottom, which is to be
removed by lifting the machine.
9. Then remove the thermocole and the machine will rest on castor (Classic) or foot
(Excel).
10. Move the machine to the place where it is to be installed.
11. Attach the drain hose to through cabinet connector and secure it with a clamp. Route
the drain hose properly.
12. Mount the faucet coupler to the tap and tighten the screws so that it does not leak.
Attach the quick disconnect to the faucet coupler. Also connect the other end of the
fill hose to inlet valve located at the top rear of the machine with the washer
provided.
13. Connect the power cord to the electrical power supply.
1. Operate the machine for one complete cycle and check for proper functioning of the
machine.
15. Use the opportunity for giving a washing demonstration to the customer.
Note: If the user feels that the preselected water level is not sufficient for washing, or if
the clothes are not freely moving inside the basket pause the machine by pressing
Start/Pause button and adjust the slide adjustment overflow position to the required
level. After filling water to the required level press Start/Pause button again to continue
the operation.
This document is only intended for qualified technicians who are aware of the respective safety regulations.
Releaded Date 27
h
Feb, 2001
Document No. WOI/WM/2001/001
Subject to modification
PAGE 13 of 44
Whirlpool of India
Advertisement
