Casio EX-G1 User Manual page 123

5.
Use the USB cable that
comes with the camera
to connect it to your
computer.
• The camera does not
draw power over the USB
cable. Make sure the
camera's battery is
sufficiently charged
before connecting.
• Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert
the connector fully can
result in poor
communication or malfunction.
• Note that even while the connector is fully inserted,
you still will be able to see the metal part of the
connector as shown in the illustration.
• When connecting the USB cable to a USB port,
make sure you align the connector correctly with the
port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer's USB port.
6.
Turn on the camera.
7.
Windows 7/Vista users: Click "Start" and then "Computer".
Windows XP users: Click "Start" and then "My Computer".
Windows 2000 users: Doubleclick "My Computer".
8.
Double-click "Removable Disk".
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
9.
Right-click the "DCIM" folder.
10.
On the shortcut menu that appears, click "Copy".
USB cable
Small connector
Making sure that the 4 mark on the camera is
aligned with the 6 mark of the USB cable connector,
connect the cable to the camera.
123
USB port
Large connector
USB/AV port
Using the Camera with a Computer