Casio Exilim EX-FC100 User Manual page 56

Select & Save
After continuous shutter shooting is finished, the shot images are played back
at slow speed so you can select the images you want to save.
• When shooting with Prerecord CS, the first image saved when you press the
shutter all the way is indicated by an "S" mark so you can tell where the
continuous shutter operation started.
While the shot images are playing back and an image
1
appears that you want to save, press the shutter
button. Each image that you select by pressing the
shutter button will have a mark appended to it.
After selecting all of the images you want to save,
2
press [MENU].
Buttons Used for Image Selection
[4] [6]
[SET]
Shutter
button
[MENU]
Use [8] and [2] to select the save method you want and then press [SET].
3
Save All
Save Selected: Saves selected images.
Back
Cancel Save : Does not save any of the images.
Always Ask
After continuous shutter shooting is finished, a prompt appears allowing you to
select Normal (Batch) or Select & Save.
Select the save method you want to use and then press [SET].
Save Selected: Saves selected images.
Save All
Cancel Save : Does not save any of the images.
5.
Press [SET] to apply the setting.
During playback, these buttons change the playback
direction and playback speed.
While playback is paused, these buttons scroll forward or
back.
Toggles between pause and play.
Press all the way down to select an image for saving.
Saves the selected images and exits the image select
operation.
: Saves all the images.
: Returns to image selection.
: Saves all the images.
56
Mark
Snapshot Tutorial