Connecting The Camera To A Printer - Casio Exilim EX-FC100 User Manual

. Connecting the Camera to a Printer

Use the USB cable that comes bundled with the camera to connect the camera to
your printer's USB port.
USB
USB port
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or
unplugging the cable. Check the user documentation that comes with the printer for
information about requirements before plugging into or unplugging from the printer.
Large connector
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
USB cable
USB/AV port
Small connector
123
Printing