Casio Exilim EX-FC100 User Manual page 181

Images are being
transferred.
Stop transfer and
turn off power?
LENS ERROR
LENS ERROR 2
Load paper!
Memory Full
Printing Error
Record Error
SYSTEM ERROR
The card is locked.
There are no files.
There are no
printing images.
Set up DPOF.
There is no image to
register.
You are attempting to turn off power while image data is
being transferred using the Eye-Fi card (page 145).
This message appears and the camera turns off whenever
the lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The Anti Shake unit of the camera may be malfunctioning.
If the same message appears after you turn power back on,
contact your retailer or a CASIO service center.
The printer ran out of paper while printing.
Memory is full with images you recorded and/or files saved
by editing operations. When shooting with Prerecord CS,
this message indicates that there is not enough memory
capacity to record all of the pre-recorded images. Delete
files you no longer need (page 32).
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some
reason during image data storage. Shoot the image again.
Your camera system is corrupted. Contact your retailer or
an authorized CASIO authorized service center.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are no files in built-in memory or on the memory
card.
There are currently no files specified for printing. Configure
the required DPOF settings (page 125).
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
181
LOCK
Appendix