Using The Camera With A Macintosh; Connecting The Camera To Your Computer And Saving Files - Casio Exilim EX-FC100 User Manual

Using the Camera with a Macintosh

Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to
do this:
Save images to your
Macintosh and view
them there manually
Save images to your
Macintosh
automatically/Manage
images
Play movies

Connecting the Camera to Your Computer and Saving Files

IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
. To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "Mass Storage", and then press [SET].
Operating
System Install this software:
Version
OS 9
Installation not required.
OS X
Use commercially available
OS 9
software.
Use iPhoto, which comes bundled
OS X
with your operating system.
You can playback with QuickTime,
OS 9 / OS X which comes bundled with your
operating system.
141
See
page:
Using the Camera with a Computer
141
144
144