Using The Tone And Balance Controls; Setting The Direct Function (Tx-8522 Only); Enjoying The Pure Audio Sound (Tx-8522 Only) - Onkyo TX-8522 Instruction Manual

TX- 85228222_En.book 23 ページ ２００６年５月４日 木曜日 午前１１時５１分
Enjoying Audio Sources —Continued
This section explains functions that can be used with any input source.

Using the Tone and Balance Controls

Adjusting the Bass
The BASS control adjusts bass
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.
Adjusting the Treble
The TREBLE control adjusts treble
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.
Adjusting the Balance
The BALANCE control is used to
control the relative volume level of
the left and right speaker systems or
headphones.
DIRECT
PURE AUDIO
BASS
Setting the DIRECT Function
(TX-8522 only)
The [DIRECT] button turns the DIRECT
function on and off.
When the DIRECT function is off, the
tone controls can be used to adjust the
sound, and the DIRECT indicator goes off.
When the DIRECT function is on, the tone controls are
bypassed, so you can enjoy a pure sound. The DIRECT
indicator lights up.
You can configure whether the DIRECT function is
applied or not for input sources individually.
Enjoying the Pure Audio Sound
(TX-8522 only)
Pressing the [PURE AUDIO]
button activates the Pure
Audio listening mode and
turns on the PURE AUDIO
indicator. The Pure Audio
listening mode allows you to enjoy purer sound by
disabling the video signal output and turning off the
indication in the display.
During the Pure Audio listening mode, the tone controls
are bypassed and adjustments using the Bass and Treble
controls are ignored.
You can configure whether the Pure Audio listening
mode is applied or not for input sources individually.
TREBLE
BALANCE
Indicator
23