Enjoying Audio Sources - Onkyo TX-8522 Instruction Manual

TX- 85228222_En.book 21 ページ ２００６年５月４日 木曜日 午前１１時５１分

Enjoying Audio Sources

Input selector buttons
SPEAKERS A/B
1 Press the input selector button
to select the component that you
Receiver
want to listen to.
(ex. TX-8522
North American
model)
Remote
controller
2
Use the [SPEAKERS A] and
[SPEAKERS B] buttons on the
Receiver
receiver to select the speaker set
that you want to use.
The A and B speaker indicators show
whether each speaker set is on or off.
Note for TX-8522 North American
model:
When you connect a set of speakers
whose impedance is 4 or 6 ohms and
output sound only from this speaker
set, the speaker impedance setting on
the receiver should be set to 6 ohms
(see page 13).
3 Start playback on the selected
component.
MASTER VOLUME
4
Indicators
INPUT
SELECTOR
To adjust the volume, use the
Receiver
receiver's [MASTER VOLUME]
control, or the remote
controller's VOLUME [
buttons.
Turn control clockwise to increase the
Remote
controller
volume or counterclockwise to
decrease the volume.
VOLUME
/
]/[ ]
21