Troubleshooting - Kogan KA9SOUSVIDA User Manual

TROUBLESHOOTING

In the event the unit stops working and indicates an error with a beep and an error code in
the LED display, refer to the following table.
Error
Description
code
NTC sensor in
E1
open loop
NTC sensor
E2
short circuited
Dry heating
E3
protection
Disposal
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources.
Possible Causes
1. NTC sensor loose
2. PCB faulty
3. NTC sensor damaged
1. PCB faulty
2. NTC sensor damaged or short
circuited
1. Pot empty or water too low
2. The PCB is damaged.
3. The mixer is missing or not in the
centre.
For further assistance, contact help.kogan.com
Solution
Contact help.kogan.com
Contact help.kogan.com
Contact help.kogan.com
Contact help.kogan.com
Contact help.kogan.com
Fill above "MIN" with clean
water
Contact help.kogan.com
Add or adjust location for
mixer