Countertop Installation; Digital Display - iGenix IG3091 User Manual

COUNTERTOP INSTALLATION

Remove all packing material and accessories. Examine the microwave for any damage such as dents or a
broken door. Do not install if microwave is damaged.
Cabinet: Remove any protective film found on the microwave cabinet surface.
Do not remove the light brown Mica cover that is attached to the microwave cavity to protect the
magnetron.
INSTALLATION
1. Select a level surface that provides enough open space for the intake and/or outlet vents.
(1) The minimum installation height is 85cm.
(2) The rear surface of the appliance should be
placed against a wall. Leave a minimum
clearance of 30cm above the microwave, a
minimum clearance of 20cm is required
between the microwave and any
adjacent walls.
(3) Do not remove the legs from the bottom
of the microwave.
(4) Blocking the intake and/or outlet openings
can damage the microwave.
(5) Place the microwave as far away from radios
and TV as possible. Operation of the
microwave may cause interference to your radio or TV reception.
2. Plug your microwave into a standard household outlet. Be sure the voltage and the frequency is the
same as the voltage and the frequency on the rating label.
WARNING: Do not install microwave over a range cooktop or other heat-producing appliances. If
installed near or over a heat source, the microwave could be damaged and the warranty would be void.
The accessible surface may be hot during operation.

DIGITAL DISPLAY

Indicates microwave cooking is taking place
Indicates grill cooking is taking place
Indicates convection cooking is taking place
Indicates microwave and grill combi cooking is taking place
+
Indicates microwave and convection combi cooking is taking place
+
+ Indicates grill and grill convection cooking is taking place
Indicates microwave, grill and convection combi
+ +
cooking is taking place
Indicates defrosting is taking place
+
Indicates the auto menu function has been selected
Indicates the safety lock is engaged
Indicates the weight is being set
Indicates the temperature
11