Kogan KAFDVACROLA User Manual page 8

4. When the indicators turn off, the vacuum sealing process is complete. Press both side
buttons to unlock the lid and remove the sealed bag.
Notes:
• If sealing multiple bags, wait for 1 minute after each seal to allow the
vacuum sealer to cool.
• If several indicators are flashing at the same time after continuous use,
the overheating protection mechanism has activated. Wait for 5–10
minutes to allow the vacuum sealer to cool before resuming use.
Stop/pulse button
• When the vacuum sealer is operating, press the stop/pulse button to immediately
stop operation.
• If the vacuum sealer is on standby and a bag is inside the vacuum chamber, press
and hold the stop/pulse button to manually control the amount of air removed from
the bag. Release the button when the desired amount of air has been removed. Press
the seal button to seal the bag.