Table of Contents
Advertisement
Quick Links
KNOW YOUR PRODUCT
3/8" REVERSIBLE
AIR DRILL
• VARIABLE SPEED
• 1800 MAX RPM
• SOFT TOUCH GRIP
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electrical shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
0721
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Full Boar FBAD-038
Summary of Contents for Full Boar FBAD-038
- Page 1 KNOW YOUR PRODUCT 3/8" REVERSIBLE AIR DRILL • VARIABLE SPEED • 1800 MAX RPM • SOFT TOUCH GRIP INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electrical shock, fire and/or serious injury. Save all warnings and instructions for future reference.
-
Page 2: Know Your Product
SPECIFICATIONS - MODEL NO. FBAD-038 Max RPM: 1800 Chuck Size: 3/8 Keyed Air Inlet: 1/4 Nitto Style Male Connector Operating Pressure: 6.2 bar (90 psi) Maximum Pressure: 10.3 bar (150 psi) Weight: 1.2 kg Air Consumption: 163 litres/min at 90 psi KNOW YOUR PRODUCT 1. - Page 3 KNOW YOUR PRODUCT 1. 3/8 Chuck 5. Adjustable Speed Knob 2. Forward Reverse Selector 6. Exhaust 3. Trigger 7. Air Inlet 4. Grip...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS............Page 02 KNOW YOUR PRODUCT........... Page 02 INTRODUCTION............Page 05 SAFETY INSTRUCTIONS........... Page 06 SET UP AND PREPARATION........Page 10 OPERATION............... Page 12 MAINTENANCE............Page 13 TROUBLE SHOOTING ..........Page 14 DESCRIPTION OF SYMBOLS........Page 15 CONTENTS.............. -
Page 5: Introduction
INTRODUCTION The Full Boar 3/8 Keyed Air Drill features a planetary gear configuration for low vibrations and quite operation. Built with an easy to use forward/reverse selector switch and variable speed dial, this professional air tool is ideal for drilling, honing, hole sawing and reaming. - Page 6 GENERAL AIR TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. Work area safety a.
- Page 7 GENERAL AIR TOOL SAFETY WARNINGS (cont.) • Please read and observe these operating instructions before using the tool. Basic safety measures should always be strictly followed to protect against damage to the equipment and personal injury to the user or other people working in the vicinity of operation.
- Page 8 3/8 KEYED AIR DRILL SAFETY WARNINGS WARNING! Disconnect the tool from the air supply before inspecting the air tool. Failure to do so could result in serious personal injury. • Read and understand instruction manual before using. • Always wear impact-resistant eye protection during the operation of the air tool.
-
Page 9: Safety Instructions
3/8 KEYED AIR DRILL SAFETY WARNINGS • Do not connect tool to pressure that potentially exceeds 150 psi (10.3 bar). • Only use clean, dry and regulated compressed air at 6.2 bar (90psi) • Only technically skilled operators should use the air tool. •... - Page 10 3/8 KEYED AIR DRILL SAFETY WARNINGS KNOW YOUR PRODUCT • High-reaction torque can be developed in case of stalling, which can be caused by excessive loads being applied to the drill bit, by the drill bit snagging on the material being drilled into or by the drill bit breaking through the material being drilled.
- Page 11 KNOW YOUR PRODUCT SET UP & PREPARATION SET UP & PREPARATION WARNING! Ensure the tool is in the off position before connecting to the air supply. Connecting air supply 1. Wrap Teflon tape (not supplied) around the Nitto Style Fitting approximately 4 to 5 times to ensure a leak free seal.
- Page 12 KNOW YOUR PRODUCT SET UP & PREPARATION WARNING! Disconnect the Air Drill from the air supply before carrying out maintenance and/or changing the drilling accessories. Changing/Securing Drill Bit 1. Ensure the Air Drill has come to a complete stop and the tool is disconnected from the air supply.
- Page 13 KNOW YOUR PRODUCT OPERATION WARNING! Ensure that the compressed air does not exceed 150 psi (10.3 bar) while operating the tool. Too high an air pressure and unclean air will shorten the product’s life due to excessive wear, and may be dangerous causing damage and/or personal injury.
-
Page 14: Operation
KNOW YOUR PRODUCT OPERATION Forward/Reverse Selection To change the direction of the Air Drill, adjust the direction control switch. Be sure the tool is no connected to an air supply to prevent accidental start ups when adjusting the knob. -
Page 15: Maintenance
KNOW YOUR PRODUCT MAINTENANCE General Cleaning • If the enclosure of the tool requires cleaning, do not use solvents but a moist soft cloth only. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. •... -
Page 16: Description Of Symbols
DESCRIPTION OF SYMBOLS Revolutions or reciprocations /min No load speed per minute Wear eye, ear & breathing Wear hearing protection protection Wear breathing protection Wear eye protection Read Instruction Manual Warning CONTENTS 1 x Air Drill 1 x Chuck Key 1 x 1/4 Nitto Style Male Connector 1 x Instruction Manual 1 x Oil Bottle... -
Page 17: Warranty
WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE (see www.bunnings.com.au or www.bunnings.co.nz for store locations) WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 951 371 New Zealand 0800 647 840...
Need help?
Do you have a question about the FBAD-038 and is the answer not in the manual?
Questions and answers