Configure Your Device; Basic Settings; Adjust The Image - Axis M20 Series User Manual

AXIS M20 Bullet Camera Series

Configure your device

Configure your device
Note
The capture mode setting is only available for AXIS M2036-LE Bullet Camera.

Basic settings

1. Set the capture mode:
1.1 Go to Video > Installation > Capture mode.
1.2 Click Change.
1.3 Select a capture mode and click Save and restart.
See also Capture modes on page 38.
2. Set the power line frequency:
2.1 Go to Video > Installation > Power line frequency.
2.2 Select a power line frequency.
3. Set the orientation:
3.1 Go to Video > Installation > Rotate.
3.2 Select 0 , 90, 180 or 270 degrees.
See also Monitor long and narrow areas on page 8 .

Adjust the image

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 38.
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to Video > Image > and click
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to Video > Image > Exposure and select between the following exposure modes:
• For most use cases, select Automatic exposure.
• For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
to show the level grid.
.
5