Warranty Certificate; Declaration Of Conformity - Vito Agro VIMETD7 Instruction Manual

Loud noise in the gear case:
• The gear case oil level is too low;
The drive shaft does not rotate with the clutch lever
engaged:
• The clutch cable is damaged;
• The gear shift lever is set in "neutral" position;

WARRANTY CERTIFICATE

The warranty of this machine is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operating, as
well as parts and work needed for their recovery.
Excluded from the warranty the misuse of the product,
any repairs carried out by unauthorized individuals
(outside the service center of the brand VITO) as well as
any damage caused by the use of it.
• Check gear case oil level and adjust if necessary;
• Check and replace clutch cable;
• Set the gear shift lever to position "1" or "2";

DECLARATION OF CONFORMITY

We declare, under our sole responsibility, that the
product labelled VIMETD7 – PETROL TILLER WITH DIRECT
TRANSMISSION complies with the following standards or
normative documents: EN ISO 12100, EN ISO 14982, EN
1679-1 e EN 709, as per defined by directives:
2014/30/EU - The Electromagnetic Compatibility
Directive;
2006/42/EC - The Machinery Directive
S. João de Ver,
20th march 2017
Central Lobão S.A.
Technical supervisor
55