Clutch Function; Operating The Tiller In Reverse; Gear Shift Lever; Throttle Knob - Vito Agro VIMETD7 Instruction Manual

Clutch function

1. Press the safety lever (19);
2. Press the clutch lever (18) and the drive shaft (25)
starts rotating;
3. When you release the clutch lever, the drive shaft
automatically stops;
To engage the drive
shaft

Operating the tiller in reverse

1. Press the reverse gear lock (31) and the reverse gear
handle simultaneously (32);
2. Press the safety lever (19) and the clutch lever (18);
3. When the gear shift lever is engaged, the gear lever
triggers the drive shaft;
4. When you release the gear shift lever, the drive shaft
stops;
When reversing, keep the safety distance and
hold the handlebars firmly so as to avoid
stumbling and the machine passing over you.

Gear shift lever

1. The gear shift lever (13) must be handled when the
clutch lever is loose;
2. The gear shift lever allows you to select three
positions according to the desired operation mode:
0, 1 and 2;
3. After setting the speed, press the clutch lever (18)
and the drive shaft starts rotating;
Start-up movement can be quite abrupt. Hold the
handlebar firmly.
To stop the drive shaft
Gear Shift lever

Throttle knob

With the throttle knob (14), it is possible to adjust the
combustion engine rotation speed.
Adjust it according to the desired speed. On the left, it
means it is stopped, leaning to the right is at maximum
speed.

Stopping the engine

In case of an emergency
To stop the engine, press "OFF", from the "ON/OFF"
switch (17);
Emergency stop
Engine start
In normal operation
1. Release the clutch lever (18), and set the gear shift
lever (13) to neutral position (0);
2. Move the throttle lever to the left;
3. Press "OFF", from the "ON/OFF" switch;
4. Close the fuel tap (5), move it to the left;
-
+
49