Advertisement
Step 8:
• Slide the cord through the (2) plastic wire holders.
• NOTE: There will not be any pre-drilled pilot holes for the plastic
wire holders. Place the wire holders near the locations shown in
the images on this page.
• Attach plastic wire holders using (2) Phillips head screws.
• The cord should be fluid without any kinks.
Step 10:
• With the help of another person, flip desk over to the upright position.
wibenchmfg.com
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Elevate Student Desk
Qty 2
Qty 4
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
04068471: -EJA
04068604: -ADJ
4mm x 15mm Phillips head screw
Plastic wire holder
8
Advertisement
