Advertisement
Step 3:
• Place top on a protected flat furface so that threaded inserts are
facing up.
•
Remove center post from the base and set the base to the side.
• Place the attachment plate on the bottom of the top, aligning the
holes in the attachment plate to the inserts in the bottom of the
top.
See image below for the correct placement.
• Place joint connector bolts w/loctite through the outermost holes
in the attachment plate.
• Secure attachment plate to the top by tightening the joint
connector bolts using a 4mm Allen wrench or 4mm hex bit and
screw gun.
Attachment Plate
wibenchmfg.com
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Elevate Student Desk
Qty 6
1/4"-20x19mm joint connector bolt w/ loctite
*Correct placement
of attachment plate/
pedestal:
plastic handle should
be turned to the BACK
side (side with shorter
distance to edge) of
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
04068471: -EJA
04068604: -ADJ
Cord for
the top.
Plastic handle
cord
3
Advertisement
