Advertisement
Step 5:
• Place (2) joint connector bolts
post, tighten bolts using a 4mm Allen wrench or 4mm hex bit and
screw gun.
• After tightening the joint connector bolts in the front side,
continue to the back side, and then to the right and left sides of
the center post.
• Please take note that images are for illustrative purposes only
and the frame may be different from the image shown in these
instructions.
Center Post
wibenchmfg.com
through the front side of the center
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Elevate Student Desk
Qty 4 (-EJA)
Qty 8 (-ADJ)
1/4"-20x19mm joint connector bolt w/ loctite
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
04068471: -EJA
04068604: -ADJ
5
Advertisement
